ASTM_A995-A995M-18 承压设备用奥氏体和铁素体双相不锈钢铸件(英文版).pdf

Designation: A995/A995M − 18 Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts1 This standard is issued under the fixed designation A995/A995M; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (´) indicates an editorial change since the last revision or reapproval. 1. Scope* A488/A488M Practice for Steel Castings, Welding, Qualifi- cations of Procedures and Personnel 1.1 This specification covers austenitic-ferritic (duplex) stainless steel castings for valves, flanges, fittings, and other A703/A703M Specification for Steel Castings, General pressure-containing parts. Requirements, for Pressure-Containing Parts E125 Reference Photographs for Magnetic Particle Indica- 1.2 The duplex stainless steels offer a combination of tions on Ferrous Castings enhanced mechanical properties and corrosion resistance when E165/E165M Practice for Liquid Penetrant Examination for properly balanced in composition and properly heat treated. General Industry Ferrite levels are not specified, but these grades will develop a E562 Test Method for Determining Volume Fraction by range of approximately 30 to 60 % ferrite with the balance