- 1、本文档被系统程序自动判定探测到侵权嫌疑,本站暂时做下架处理。
- 2、如果您确认为侵权,可联系本站左侧在线QQ客服请求删除。我们会保证在24小时内做出处理,应急电话:400-050-0827。
- 3、此文档由网友上传,因疑似侵权的原因,本站不提供该文档下载,只提供部分内容试读。如果您是出版社/作者,看到后可认领文档,您也可以联系本站进行批量认领。
查看更多
2013 SECTION II, PART A SA-210/SA-210M
SPECIFICATION FOR SEAMLESS MEDIUM-CARBON
STEEL BOILER AND SUPERHEATER TUBES
SA-210/SA-210M
(Identical with ASTM Specification A210/A210M-95 except for editorial differences in Table 2.)
313
SA-210/SA-210M 2013 SECTION II, PART A
SPECIFICATION FOR SEAMLESS MEDIUM-CARBON
STEEL BOILER AND SUPERHEATER TUBES
SA-210/SA-210M
(Identical with ASTM Specification A 210/A 210M-95 except for editorial differences in Table 2.)
1. Scope A 520 Specification for Supplementary Requirements for
1.1 This specification covers minimum-wall-thickness, Seamless and Electric-Resistance-Welded Carbon Steel
seamless medium-carbon steel, boiler tubes and boiler Tubular Products for High-Temperature Service Con-
flues, including safe ends (Note 1), arch and stay tubes, forming to ISO Recommendations for Boiler Con-
and superheater tubes. struction
NOTE 1 — This type is not suitable for safe ending by forge welding.
3. Ordering Information
1.2 The tubing sizes and thicknesses usually furnished
1 3.1 Orders for material under this specification should
to this specification are ⁄ 2 in. to 5 in. [12.7 to 127 mm]
include the following, as required, to describe the desired
in outside diameter and 0.035 to 0.500 in. [0.9 to 12.7 mm],
您可能关注的文档
- A0653_A0653M-17 英文版.pdf
- ASME B16.49-2017 Factory-Made, Wrought Steel, Buttwelding Induction Bends for Tr英文版标准文件.pdf
- ASME SA420SA420M-2017 英文版标准文件.pdf
- ASME SA450-2015 碳钢、铁素体和奥氏体合金钢钢管一般要求.pdf
- ASME B30.26-2015 索具五金标准文件.pdf
- ASTM_A995-A995M-18 承压设备用奥氏体和铁素体双相不锈钢铸件(英文版).pdf
- ASTMA579-A579M-17 英文版标准文件.pdf
- ASTMA193-A193M-2014a CHN英文版标准文件.pdf
- ASTMD7450-13StandardSpecificationforPerformanceofRearAxleGearLubricant.英文版.pdf
- ASTME96-E96M-16 英文版标准文件.pdf
- ASTME155-2015中文版标准文件.pdf
- CNAS-CL02:2015 医学实验室质量和能力认可准则.pdf
- EN 50121-1-2015-中文标准文件.pdf
- F 2730 - F 2730M - 18a 英文版.pdf
文档评论(0)