F 2730 - F 2730M - 18a 英文版.pdf

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. Designation: F2730/F2730M − 18a Standard Specification for Silicon Nitride Cylindrical Bearing Rollers1 This standard is issued under the fixed designation F2730/F2730M; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (´) indicates an editorial change since the last revision or reapproval. 1. Scope 2.3 ASME Standard:3 B 46.1 Surface Texture (Surface Roughness, Waviness, and 1.1 This specification covers the establishment of the basic Lay) quality, physical/mechanical property, and test requirements 2.4 JIS Standards:4 for silicon nitride rollers Classes I, II, and III to be used for R 1601 Testing Method for Flexural Strength (Modulus of cylindrical roller bearings. Rupture) of High Performance Ceramics 1.2 The values stated in either SI units or inch-pound units R 1607 Testing Method for Fracture Toughness of High are to be regarded separately a