地埋箱变.pptVIP

Underground prefabricatedMV/LV substation, EHS-2 type EHS-2 : underground substation outdoor operated up to 630 kVA - 24kV outdoor operated : large access for the operator, protection of the public with integrated fences footprint 9 m2 thermal class 10 two types of ventilation : Horizontal : EHSH-2 or Vertical with chimneys : EHSV-2 designed tested according to IEC61330 EHS-2 underground substation equipment RM6 MV Ring Main Unit IQI or IDI type oil immersed hermetically sealed transformer up to 630 kVA (according to dimensions) LV switchboard with MCCBs or fuseways earthing collector, lighting options : Remote Terminal Unit, Fault Passage Indicator, Remote Monitoring Terminal (Easergy range) EHS-2 dimensions and weight EHSV-2 dimensions of the chimneys EHS-2 concrete enclosure concrete having a minimum mechanical strength of 250 kg/cm2 cover designed to withstand : static load of 5000 kg, dynamic load of 5000 Kg at 30 km/h ventilation grids degree of protection : IP2XD for EHSH-2, IP23D for EHSV-2 12 pre-broken holes of 150 mm diameter for cables entry EHS-2 concrete enclosure manufacturing EHS-2 access for operation EHS-2 access for operation EHS-2 access for equipment replacement EHS-2 : natural ventilation Computer Aided Design EHSH-2 : natural ventilation EHSV-2 : natural ventilation EHSH-2 : rainwater evacuation EHS-2 oil retention tank EHS-2 installation acces for a 70 Tm crane required excavation depht 2704 mm, lenght and width according to cables lay-out 150 mm thick sand layer on the bottom of the excavation concrete raft (20 cm thickness) on the floor of the excavation recommended when the soil resistance is less than 1 kg/cm2 EHS-2 installation EHS-2 installation EHS-2 installation a removable part (using a crane) giving access to install or remove the equipment (one ventilation grid is included). That part may have the standard finish from the factory or be manufactured to receive a pavement according to the environment EHSV-2 ventila