- 11
- 0
- 约4.5万字
- 约 57页
- 2018-10-10 发布于广西
- 举报
毕 业 论 文(设 计)
中文题目: DC-DC LED驱动电路设计
英文题目: The DC-DC Driver Cricuit Design of LED
姓 名
学 号
专业班级 电子信息工程1班
指导教师
提交日期 2012年5月19日
教务处制
DC-DC LED驱动电路设计
姓名: 班级: 电子信息工程1班
指导老师: 职称:教授
(惠州学院电子科学系,广东,惠州,516007)
中文摘要
摘 要
随着大功率LED在灯光装饰和照明中的普遍使用,大功率LED驱动电路设计显得越来越重要。在LED迅速发展的今天,LED驱动电路也随之快速跟进,多种驱动方式并存,不同的设计方案在完善。在LED照明领域,没有好的驱动器的匹配,LED照明的优势将无法体现。大功率LED是电流型器件,严格的控制流过LED的电流是恒定的及其重要,而且还要实现可以对LED调光,满足各种需求。 本论文对LED的驱动方式进行了深入探讨,并基于集成电路PT4115设计了一个低成本、高效率、发光可调的恒流驱动电路,用以实现大功率LED的驱动。对驱动电路原理进行分析后,动手制作了实物电路,并用示波器观察了电路输出波形。实验结果表明所设计的驱动电路能保证LED的稳定高效率发光,在工程上有广泛地应用前景。
【关键词】:大功率LED、开关电源、PWM、恒流驱动、PT4115、STC89C52
英文摘要
The DC-DC Driver Cricuit Design of LED
Author: Zhou Biaoping Major:Electronic Information Engineering
Teacher:Cao Jianzhong Title:professor
(Electronic Science Deparment of Huizhou University,Guangdong,Huizhou,516007)
Abstract
With the widespread use of high-power LED in the lighting and decoration ,the driver circuit design of high-power LED is becoming increasingly important. Today at the rapid development of LED, LED drive circuit also will fast track, multi-drive circuit modes exist,and different designs options is in improving. in the area of LED lighting, if there is no good driver circuit using, the advantages of LED will not be reflected. High-power LED is current-mode devices, strict control of constant current flowing through the LED is important, but also the LED dimming can be achieved to meet the various needs.
The dissertation discusses in depth the driving LED mode, and based on IC PT4115 I design a lowcost,high efficiency, longer life,dimmable and constant current drive circuit to drive high-power LED. Then to analysis the driving circuit, I made the physical circuit and watched the circuit output with an oscilloscope waveform. The experimental results show that the design of the drive c
您可能关注的文档
- (毕业论文毕业设计)-_外文翻译__日本隧道维修Tunnel_maintenance_in_Japan.doc
- (毕业论文毕业设计)-_外文翻译--安塞超低渗油田注水开发与稳产技术.doc
- (毕业论文毕业设计)-_学生成绩管理系统的设计与实现.doc
- (毕业论文毕业设计)-_外文翻译_蓄电池能量管理_电力电子_开关电源_充电_放电_模型_电气工程_自动化_电力系统.doc
- (毕业论文毕业设计)-“Y”形支架双面钻机床总体设计和左主轴箱设计.doc
- (毕业论文毕业设计)-“Z”型导电片冲压模具设计.doc
- (毕业论文毕业设计)-“Z”型导电片冲压模具设计毕业学术论文.doc
- (毕业论文毕业设计)-“包装机对切部件”设计.doc
- (毕业论文毕业设计)-“充电器后盖壳”零件“一模一穴”点浇口注塑模具设计.doc
- (毕业论文毕业设计)-“基于AT89C51单片机综合火灾报警器”生产工艺_实习报告.doc
原创力文档

文档评论(0)