等离子喷涂技术在固体氧化物燃料电池中应用.PDFVIP

18 6 Vol.18 No.6 2005 12 CHINA SURFACE ENGINEERING Dec. 2005 6 1 1,2 1 1 1,2 1. 510651 2. 510640 (SOFC) SOFC 30~50 µmSOFC 100~120 µm 800 TG115.5+7 A 1007–9289(2005)06–0001–04 The Application of Plasma Spray in Solid Oxide Fuel Cell 1,2 1 1 1,2 DENG Chun-ming ZHOU Ke-song LIU Min WU Chao-qun 1.GuangZhou Research Institute of Nonferrous Metals, GuangZhou 510651; 2. Materials and Energy College in Guangdong University of Technology, GuangZhou510640 Abstract:The current progress of electrolyte, cathode, anode and their sub-assemblies of SOFC fabricated by plasma were overviewed and the key manufacturing techniques for SOFC were also analyzed in this article. The research showed that dense electrolyte, porous cathode and anode could be manufactured using plasma spray with optimized technique and proper powder delivery and powder starting materials. The thickness of three SOFC functional units all distributed 30~50 µm, and the total thickness of SOFC was within 100~120 µm, which lowered the operation temperature to 800 and reduced the requirement for related materials of SOFC and operation cost. Key words: plasma spray; solid oxide fuel cell(SOFC) 0 50 % ~65 % [1] SOFC600~1 000 SOFC APS