（毕业学术论文设计）-双通道热量计量系统设计.docVIP

精品 精品 精品 河南科技学院 本科毕业论文（设计） 论文题目：双通道热量计量系统设计 学生姓名： 所在院系： 机电学院 所学专业： 应用电子技术教育 导师姓名： 完成时间： 年 5 月 20 日 摘 要 当前，我国的供热收费主要以“大锅饭式”为主，仅有部分城市采用单通道热量计量系统，价格比较昂贵，并且不能防止用户盗水情况的发生，对于供暖公司和用户来说都是有弊端的。本设计是根据国家最新标准设计的双通道热量计量系统，设计的目的主要是为了解决用户盗水的情况发生和生产成本的问题。设计中采用AT89S52单片机芯片作为核心控制模块，温度测量采用支持单总线的DS18B20芯片，测量精度可以达到0.0625℃，流量采集采用霍尔元件A44E进行信号测量。最终系统可实现双通道的流量采集和温度采集，室温的采集和控制，各种数据的液晶显示，热量消费的预付费以及掉电保护等功能。 关键词：热量计量，双通道，预付费，非接触式卡 Dual-channel measurement of the thermal system design Abstract At present, China is mainly the heat is Apportionment of heating costs，Only in some cities use single-channel heat metering system, prices are more expensive, it can not prevent the occurrence of water users to steal, these problems make heating enterprises and users at a disadvantage. The design is in accordance with national standards for the design of the latest dual-channel heat metering system. The main purpose of design is to solve the theft of water users and the occurrence of the problem of the cost of production. In the design, use as a core control chip AT89S52, temperature measurement used in support of a single bus DS18B20 chips, measuring accuracy can reach 0.0625℃, The water flow signal of acquisition is use Hall switch components A44E, the system is dual-channel flow can be collected and dual-channel temperature acquisition, indoor temperature of collection and control, the liquid crystal display of data, pay first and then use the heat。 Key words：Heat measurement, Dual-channel, Prepaid, Non-contact card 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc231053341 1 绪论 PAGEREF _Toc231053341 \h 1 HYPERLINK \l _Toc231053342 1.1 设计意义 PAGEREF _Toc231053342 \h 1 HYPERLINK \l _Toc231053343 1.2 设计中需要重点解决的问题 PAGEREF _Toc231053343 \h 1 HYPERLINK \l _Toc231053344 2 设计分析与方案的确定 PAGEREF _Toc231053344 \h 1 HYPERLINK \l _Toc231053345 2.1 设计方案 PAGEREF _Toc231053345 \h 2 HYPERLINK \l _Toc231053346 2.2 方案对比及确定 PAGEREF _Toc231053346 \h 2 HYPERLINK \l _Toc231053347 3 主要模块的设计 PAGEREF _Toc231053347