（毕业学术论文设计）-圆盘剪切机设计说明书.doc

PAGE 河南理工大学万方科技学院毕业论文 PAGE 15 - 摘要 圆盘剪用于剪切带材的边部和把宽带材切分成窄带材 ,被广泛用在板带生产车间和辅助作业机组中 ,如横剪机组、纵剪机组、重卷机组、酸洗机组、镀锡机组及焊接机组等。圆盘剪工作好坏直接影响到产品的质量。此次设计从实际工作环境出发，确定了明确的毕业设计方向。并对圆盘剪切机在使用中经常出现的问题有一定的研究，且应用在创新设计计算中。已经开始对课题进行设计计算，并有了突破性的近展，设计过程已经快速的展开，确定了工作的内容和方法。同时，已经完成相关资料的查阅，对课题有了总体分析。设计思路已经很明确，并有了一定的进展。圆盘式剪切机由于刀片是旋转的圆盘，因而可连续纵向剪切运动钢板和带钢。圆盘式剪切机通常设置在精整作业线上用于将运动着的钢板纵向边缘切齐和剪切或者切成窄带钢，根据其用途可分为剪切板边的圆盘剪和剪切带钢的圆盘剪.。这次选圆盘式剪切机作为设计题目是在对1700横切机组的调研的背景下进行的。1700横切机组使用多年，其中圆盘剪使用过程中存在一些问题。该厂对该剪切机也进行了多次改造。圆盘剪使用过程中传动系统精度底，径向调整机构和刀片侧向调整精度低，迫切要求更新和改造设计。 这次设计的目的就是通过设计对主轴传动系统，刀片侧向调整机构，特别是各个机构中的传动部分进行设计。通过设计过程掌握圆盘剪单体机械设备的设计方法，使所学的理论知识和实际结合起来，提高设计能力，独立分析能力和绘图技术，进行规范化的的训练为今后的工作打下有力的基础。 关键词：圆盘剪切机 齿轮 传动系统 机械设计 热轧钢板 Summary Disc cut for shear edge strip and wide strip cut into narrow strip, widely used in strip production plant and auxiliary operating units, such as cross cut unit, slitting machine, recoiling unit, pickling units, tinning unit, and the welding unit. Disc cut a direct impact on the quality of the product. The design starting from the actual working environment, to determine a clear direction of graduate design. Recurring problems and disc shearing machine in use has done some research, and application of innovative design calculations. Design calculations has already begun on the subject, and made a breakthrough in nearly exhibition design process has to start quickly to determine the content and methods of work. At the same time, has completed the inspection of the relevant information, has been the overall analysis of the subject. Design ideas have been very clear, and there had been some progress. Disc-type shearing machine blade is a rotating disk, which can be continuous vertical shear movement sheet and strip. Disc shears are usually set for the movement of the plate longitudinal edges cut flush cut or cut into narrow steel finishing operations online can be divided according to their uses scissors and cut the disc side of the clipboard cut the disc of the strip are cut. The selected