- 9
- 0
- 约2.49万字
- 约 41页
- 2018-10-21 发布于上海
- 举报
超宽带天线及其陷波特征的研究与设计-电子与通信工程专业论文
摘要
摘要
万方数据
万方数据
摘 要
超宽带技术作为无线通信技术的重要组成部分,它被真正的使用是从二十世 纪六十年代开始的,最初它被用于雷达探测,但在此后的一段时间内宽带技术发 展较为缓慢。后来因为其高传输速率、保密性好、高增益、低功耗等原因,它成 为国内外学者研究和讨论热点。在已经规定的超宽带频段内还存在 WiMAX
(3.35‐3.75GHz)、WLAN(5.725‐5.85GHz)以及 X 波段卫星系统的干扰,为了排
除这些频段的干扰人们开始对陷波天线的研究。 论文首先介绍超宽带系统的一些理论基础以及超宽带天线的主要性能参数,
如增益、回波损耗、电压驻波比等。其次论文设计了两款超宽带天线,圆形缝隙 微带天线和微带馈电超宽带天线。运用仿真软件对天线的某些参数进行仿真,进 一步分析优化最后得出最佳尺寸。这两款天线在各个性能方面较为优良,满足超 宽带天线的工程要求。然后又设计了两款单陷波的超宽带天线,陷波频率范围选 为 5.15‐5.85GHz,运行仿真后天线的各项性能优良,满足陷波要求。此外还介绍 一款双陷波超宽带天线,陷波频段范围选为 3.35‐3.75GHz 和 5.15‐5.85GHz。最后 设计的一款具有三陷波特征的天线,它在 3.35‐3.75GHz 、 5.15‐5.85GHz 、 7.25‐7.75GHz 形成陷波,排除了这些频段对于超宽带通信系统的干扰。具有较大 的实用价值。
超宽带技术在将来会成为短距离高速率无线通信技术的最佳选择,而超宽带 天线是超宽带通信系统用来发射和接收信号的关键器件。因此,超宽带天线的研 究与设计具有相当大的研究潜力。
关键词:超宽带天线;陷波特征;阻抗匹配;回波损耗
I
Abs
Abstract
Abstract
Ultra‐technology as an important part of wireless communication technology, It is used by the real from the 1960 s, Originally, it is used for radar detection , but after a period of time broadband technology development is relatively slow. Later because of its high transmission rate, good secrecy, high gain, low power consumption and so on, It is becoming a hot spot of domestic and foreign scholars research and discussion. In the already exist within a prescribed ultra wideband spectrum microwave Internet, wireless local area network (LAN) and global interference of X band satellite communication system. In order to exclude the interference of the spectrum people launched the study of trap antenna.
Paper first introduces some theories of ultra‐wideband system foundation and
the main performance parameters of the ultra‐wideband antenna, Such as gain, return loss, voltage standing wave ratio and so on. The second paper introduces the design of two ultra broadband antenna, Circular aperture monopole ultra‐wideband monopole antenna peace panel ultra‐wideband antenna. Using the simulation software to analyze some parameters of the antenna optimization finally concluded that the best size. The two antenna in each performance is relatively goo
您可能关注的文档
- 超声-化学沉淀法制备超细氧化铝-材料学专业论文.docx
- 超声ELID复合加工电参数的研究-机械工程专业论文.docx
- 超声-TIG复合焊枪优化设计及铝合金焊接试验研究-材料加工工程专业论文.docx
- 超声RTE与SWE技术在肝脏检查中的可重复性比较-影像医学与核医学专业论文.docx
- 超声ELID复合内圆磨削ZTA陶瓷磨削力和表面质量的研究-机械工程专业论文.docx
- 超声ELID复合磨削ZTA陶瓷氧化膜特性研究-机械工程专业论文.docx
- 超声-MIG复合焊接声场参数的优化及熔滴过渡的研究-材料工程专业论文.docx
- 超声TIG复合焊枪优化及焊接工艺的研究-材料加工工程专业论文.docx
- 超声TOFD缺陷检测成像处理系统的研制-电路与系统专业论文.docx
- 超声TOFD法成像技术及其在焊缝缺陷检测中的应用-机械工程专业论文.docx
最近下载
- 2025至2030中国有机冷冻蔬菜业行业项目调研及市场前景预测评估报告.docx
- 光宝ISA-7X标准泛用型伺服系统技术手册.pdf
- 大型羊场及配套沼气建设项目可行性研究报告书.doc VIP
- 2022-2023学年八年级英语下学期期末考点大串讲(牛津译林版):八年级英语下学期期末考试02(宿迁卷).pdf VIP
- 高中英语必背3500单词表(完整版).pdf VIP
- 催收评分技术及其在个人信贷催收管理中的应用.pdf VIP
- 土木工程测量-岳建平第1章绪论资料.ppt VIP
- 电磁场仿真软件:CST Microwave Studio二次开发_(6).材料属性设置.docx VIP
- 浙江省金华市十校联考2025-2026学年第一学期期末质量检测高一英语试题含答案.pdf
- 电磁仿真软件:CST Microwave Studio二次开发_(8).高级脚本应用:电磁建模与求解.docx VIP
原创力文档

文档评论(0)