储层裂缝预测的一维有限元数值模拟研究-计算数学专业论文.docxVIP

模型，利用多元统计方法的反复讨论和试算，得出了裂缝的不同层段的平均密度， 为储层裂缝的分布规律的预测提供了充分的准备，也为后续的研究工作打下了良 好的基础。 关键字: 有限元数值模拟 ANSYS 分析软件 储层裂缝 定量预测 Reservoir fracture prediction of three-dimensional finite element numerical simulation Introduction of the author: Guangfen You，female， was born in December， 1984 whose tutor was Professor Gonghao and Associate Professor Zhouzhongli . she graduated from Chengdu University of Technology in Computational Mathematics major and was granted the Master Degree of Science in June， 2010. Abstract In this paper， three-dimensional finite element numerical simulation， the group of Qom in Iran kashan area A to F section of the tectonic stress field of finite element modeling and element stress and strain analysis. The finite element linear algebraic equation: Kα = P + Q  (1) K = L K e  (2) eK = fffBt DBdV e  (3) P = L Pe  (4) eP = fff N t PdV e  (5)  Q = LQe  (6) Q = N t qdV e fff  (7) In the above seven equations based on the theory， study and use ansys software combined with the existing Iranian kashan area Qom group to study models and mechanical models based on the use of ANSYS software in the three-dimensional 8-node hexahedral element simulation kashan area Qom group AF section of the tectonic stress field， using solid45 solid element simulation of the geological model， mechanical model， the boundary forces of action and constraints， fault handling and mathematical model are predigested， which established a regional Qom group kashan A to F section of tectonic stress field in three-dimensional finite element model and the finite element modal analysis， the different layers of stress and strain on the situation. And has the status of the stress field in good agreement for the quantitative prediction of reservoir fracture provided the reference. In this paper， regional Qom Iran kashan group A to F of fault， anticline， syncline， the main purpose of the calculation model of layers and objects， using fine mesh of three-dimensional element， finit