抛光机磨头抛光深度建模与实验.PDFVIP

2012 年 5 月 机械科学与技术 May 2012 31 5 Mechanical Science and Technology for Aerospace Engineering Vol． 31 No． 5 第 卷 第 期 抛光机磨头抛光深度建模与实验 ， ， 邵俊鹏 徐 斌 李 冲 ( ， 150080) 哈尔滨理工大学机械动力工程学院 哈尔滨 邵俊鹏 : ， ， 摘 要 为了研究抛光机磨头在垂直方向上的抛光量 分析了抛光机的结构和运行原理 以及磨块 ， 。 上的磨粒抛光瓷砖机理 分析结果得出磨头在垂直方向上以螺旋形轨迹抛光瓷砖 将磨块简化为 ， ， 。 刮刀模型 建立磨头在垂直方向上的抛光深度数学模型 并通过实验验证了所建模型的正确性 : ; ; ; 关 键 词 抛光机 磨头 磨块 抛光深度 中图分类号:TH17 文献标识码:A 文章编号:1003-8728 (20 12)05-07 13-05 Modelling and Experiments for Polishing Depth with Grinding Head of Polishing Machine Shao Junpeng ，Xu Bin ，Li Chong (College of Mechanical Power Engineering ，Harbin University of Science and Technology ，Harbin 150080) Abstract :In order to investigate the polishing depth with grinding head of polishing machine in perpendicular di- rection ，the structure and principle of polishing machine was analyzed and the principle of polishing tile with grind- ing grain was analyzed． It is concluded that tiles were polished by grinding head in a spiral track． Grinding block is simplified as the scraper and the mathematical model of polishing depth with grinding head of polishing machine in perpendicular direction is established． The effectiveness of the model is verified by experiments． Key words :polishing machine ;grinding head ;grinding block ;polishing depth