钢筋混凝土梁抗弯加固实验的研究.docVIP

钢筋混凝土梁抗弯加固实验的研究 　　Reinforced concrete beam bending reinforcement experimental study 　　Engzi house 　　(lanzhou jiaotong university, in gansu, civil engineering college lanzhou 730070) 　　Abstract: carbon fiber because of its light weight, high strength, corrosion resistance, anti-fatigue performance and so on is superior performance, so CFRP reinforcement in concrete has extensive applications, in recent years in academic and engineering caused wide interest. Based on carbon fiber composite reinforcing steel reinforced concrete beam of experimental data, make a series of analysis, the research of the experimental beams preloading characteristics of load and the influence of the rigidity. 　　Keywords: reinforced concrete beam; CFRP; Reinforcement; Preloading; Load characteristics; stiffness 　　1.. Experiment scheme 　　The experiment were 18 root beam, according to the longitudinal reinforcement rate into A, B two groups. The size of the beam for 150 mm wide, high 250 mm long, 2500, sectional shape, size and reinforcement is shown in figure 1 below. This experiment is the design of concrete strength for C25, concrete compressive strength is 23 MPa, longitudinal reinforcement yield strength for 360 MPa, elastic modulus for 200 GPa, CFRP tensile strength for 3550 MPa, elastic modulus for 235 GPa,, the single CFRP thickness of 0.111 mm. 　　The experiment test content includes: displacement (cross, the distribution of two support beam position), carbon fiber strain, beam longitudinal reinforcement strain, the strain of concrete and crack development situation. 　　The experiment process: the simply supported; The length of 2000 mm, pure bending length for 500 mm; CFRP paste length of 1800 mm, width is 120 mm, no additional anchor measures. Loading method: the hydraulic jack reverse two symmetric loading. 　　 　　2. The experimental results 　　2.1 the failure process 　　16 the beams appeared two kinds of failure mode: (1) CFRP plate tensile; (2) the middle caused cracks CF