基于内变量TA15板材室温拉伸力学性能预测模型.PDFVIP

25 3 2015 3 Volume 25 Number 3 The Chinese Journal of Nonferrous Metals March 2015 1004-0609(2015)-03-0652-10 TA15 1 1 2 1 (1. 1000832. 150001) β TA15 β −Bridgman β αβ β −β 18.63%20.04%− TA15 TG146.2 A Prediction model of tensile mechanical properties of TA15 sheet at room temperature based on internal variables 1 1 2 1 YANG Lei , WANG Bao-yu , LIU Gang , ZHAO Hui-jun (1. School of Mechanical Engineering, University of Science and Technology Beijing, Beijing 100083, China; 2. School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China) Abstract: The sheet specimens of TA15 sheet with different volume fractions of β phase were obtained by vacuum annealing. Then, the stress−strain curves of sheet with different volume fractions of β phase were obtained by tensile test at room temperature, and the true stress after necking was corrected through the well-known Bridgman equations. The results indicate that the tensile strength increases slightly with the volume fraction of β phase. With increasing volume fraction of β phase, the fracture strain increases significantly. Considering the flow behavior of two phases, respectively, a set of constitutive equations coupling dislocation density and damage based on the continuum damage mechanics were developed. The model constants were determined using genetic optimization algorithm (GA). The stress−strain curves of the sheet with 18.63% and 20.04% β phase were used to evaluate the proposed model. The