《基于simulink的扩频通信系统仿真研究》-毕业论文.docVIP

精品 摘 要 本文介绍了扩展频谱通信的理论基础和实现方法，简要介绍了计算机仿真的相关知识，通过MATLAB 提供的Simulink 仿真平台对直扩通信系统进行了仿真。并得到了预期的仿真结果。同时利用仿真模型研究了直扩通信系统扩频增益、干扰容限与误码率及信道信噪比之间关系,为其抗干扰的实际应用奠定了基础。结果表明，提高信噪比，系统可以有效抑制高斯白噪声信号的干扰，进一步降低误码率。 关键词：扩频通信；信干比；误码率；抗干扰 ABSTRACT Abstract :The basic theory and the method of implement of the spread spectrum is introduced, the knowledge of thecomputer simulation is presented.The simulation model of the direct sequence spread spect rum(DSSS) communication system is built by using Simulink which is a visible tool of Matlab in this paper, each module design of simulation model is int roduced in detail. Under the given simulation condition, the simulation module is run and detected, the result answers for t he anticipated effect . Meantime, this paper studies the relationship among the spread spectrum gain and interference tolerance of DSSS communication system, error ratio, SNR of channel by means of the simulation module,which establishes the base for the practical application of it s anti-jamming. Keywords: spread spect rum communication; SIR(Signal to Interference Ratio); BER(bit error ratio); anti-jamming. 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc256022747 1 引言 PAGEREF _Toc256022747 \h 1 HYPERLINK \l _Toc256022748 2 DS-CDMA扩频通信系统 PAGEREF _Toc256022748 \h 2 HYPERLINK \l _Toc256022749 2.1 扩频通信系统简介 PAGEREF _Toc256022749 \h 2 HYPERLINK \l _Toc256022750 2.2 直接序列扩频通信系统 PAGEREF _Toc256022750 \h 3 HYPERLINK \l _Toc256022751 2.2.1 直接序列扩频通信系统简介 PAGEREF _Toc256022751 \h 4 HYPERLINK \l _Toc256022752 2.2.2 m序列 PAGEREF _Toc256022752 \h 5 HYPERLINK \l _Toc256022753 2.2.3 数字调制技术 PAGEREF _Toc256022753 \h 8 HYPERLINK \l _Toc256022754 3 基于Simulink的扩频通信系统仿真 PAGEREF _Toc256022754 \h 10 HYPERLINK \l _Toc256022755 3.1 计算机仿真简介 PAGEREF _Toc256022755 \h 10 HYPERLINK \l _Toc256022756 3.2 Simulink简介 PAGEREF _Toc256022756 \h 11 HYPERLINK \l _Toc256022757 3.3 模型建立及主要模块设计 PAGEREF _Toc256022757 \h 12 HYPERLINK \l _Toc256022758 3.3.1 m序列反馈移位寄存器仿真模型 PAGEREF _Toc25602