减小D-STATCOM系统侧电流THD的策略-研究.pdfVIP

Abstract Abstract The nonlinear，reactive and asymmetric loads in distribution network result in serious deterioration of the quality of power supply, which not only causes economic loss to power consumers, but also causes negative impacts on the safe, stable, and economical operation of distribution network. D-STATCOM, which can ahieve multi-tagets compensation, is the core of custom power technology. With advantages suh as strong adjustment ability, wide range of operation, fast response, it has become the current research focus in the field of power quality control. As research continues, it was discovered that the track of the compensating current reference is not so accurate, which causes negative Influence compensation effect. In addition, the compensating currents contain high-frequency noises of switch frequency and its multiplication This paper introduces topology, compensating current reference detection, control of capacitor voltage on DC link, and other main technologies of D-STATCOM. As the suppression that traditional L filter exercises on noises of switch frequency is limited, a LCL filter is designed to filter noises of switch frequency. The effects of various parameters on the filtering performance of LCL filter are analyzed, and the steps of parameter design are given in this paper. In additon, the compensating current reference of D-STATCOM is the sum of each harmonic currents, while ac signals can’t be tracked with zero steady-state error with traditional PI controller.Considering that generalized integrator can integrate the amplitude of ac signal, generalized integrator is introduced to tradi