大功率晶体管射频激光电源的分析-物理电子学专业论文.docx

Abstract The transistor RF laser power is the preferred power source for small and medium power RF slab laser with low operating voltage, small size, high efficiency, long life and other advantages. The high-power transistor is selected as the main amplifier tube of the RF power, which can be effective in reducing the number of amplifier modules, making the power structure more compacted and improving its reliability. In this thesis, the principle and structure of the RF laser power have been analyzed, and the simulation design of its main amplifier circuits have been carried out. At last, the RF laser power experiments have been accomplished with the load. The main contents are as following: According to the requirements of the RF-excited CO2 slab laser, the transistor laser power has been chosen as the research and design object by analyzing and discussing the advantages and disadvantages of the vacuum tube power and transistor power. The structure and main technical parameters of a RF laser power supply system are designed. The preceding stage excitation module has been designed in the thesis, mainly including a crystal oscillator which could generate a weak fixed-frequency RF signal, a 100mW amplifier circuit, a 5W amplifier circuit, a 300W amplifier circuit and a power distribution circuit. Each amplifier circuit has been designed through the software multisim. The final-stage amplifier and synthesizer of the 8kW amplifier module have been designed. The 8kW amplifier module consists of eight final stage amplifiers which choose the high power LDMOS transistor and a final stage synthesizer. The simulation design of the final stage amplifier circuit has been carried out by the ADS (Advanced Design System) software. The study on the power experiments has been carried out. Through the load experiments with dummy load and the laser load respectively, the power output characteristics are researched. Key words: RF laser power supply Transistor Amplifier Power divide