磷含量对细晶镍基gh4133合金力学性能的影响.docxVIP

第40卷 第40卷 第5期 仓属学坂 Vol 40 No 5 2004年5月 477—482页 ACTA METALLURGICA SINICA May 2004 PP．477482 磷含量对细晶镍基GH4133合金力学性能的影响 孙文儒 郭守仁 孟晓娜 李娜 胡壮麒 (中国科学院金属研究所，沈阳110016) 摘 要 适当磷含量可提高细晶镍基GH4133合叠的力学性能采用控制热加工和热处理的方法将GH4133台盒的品粒度细 化至ASTM 10级该细晶台金的最低屈服强度比晶粒度为ASTM 4—5级正常组织的台盆高200 MPa“上．虽低断裂强度 高150 MPa以卜磷含量为0．140％(厦量分数，下同)的细晶台金的屈服强度相对于正常磷古量(o．005％)的细晶台金又高约 MPa，断裂强度约商50 MPa镍基GH4133合金中．磷古最低{’0 140％，拉伸试样均呈穿晶断裂磷含量低于0 023％ 时，冲击断口呈穿晶断裂，冲击韧性高于70 MJ／m。；磷含量升至o 140％时，冲击断口部分区域呈沿晶断裂，冲击韧性约降至 40 MJ／m。．延长GH4133合盒持久寿命的最佳磷含龟位于o o儿％附近结合位错与磷原于气团的相互作用讨论丁上述小同 载荷疗式下磷对台金力学性能的影响特点 关键词磷，镶基高温合金，力学性能 中圉法分类号TGIl3 25，TGl32 3 文献标识码A 文章编号0412--1961(20N)05--0477—06 EFFECT oF PHoSPHoRUS oN MECHANICAL PRoPERTIES oF FINE～GRAINED GH4133 NICKEL BASE SUPERALLoY SUN Wenru，GUO Shouren，MENG Xiaona，LI Na，日U Zhuangqi Metal Academy Correspondent：SUN Wenru，associate professor，Tel：(024E-mail：wrsun@imr．ac Supported by National Natural Science Foundation of China(No Manuscript form ABSTRACT Apposite phosphorus content improve the mechanical properties of the fine— grained GH4133 nickel-base superalloy．The grain size of the alloy was refined to ASTM 8—10 grade by controlling the thermal processing and the heat treatment The tensile specimens fail by intergranular fracture when the phosphorus level is high 0 140％(nlasS fraction】The yield and ultimate strengths of the refined alloy 200 and 150 MPa higher than that of the alloy with standard microstructure of ASTM 4 5 grain size．respectively．And the above two strengths of the alloy with 0．14e％phosphorus i00 and 50 MPa higher than those of the ahoy with industrial controlled phosphorus level，say 0 005％．The impact specimens fail by intragranular fracture when the phosphorus level is below o．023％and the fracture toughness of the alloy is higher than 70 MJ／m2 Some parts of the fracture surface of the impact specimen with 0．140％phosphorus exhibited intergranular fracture characteristic