低成本单片机在DVDRW影碟机中的应用电子与通信工程专业论文.docx

II II ABSTRACT ABSTRACT Single Chip started at the end of 70s’ in the 20th century. It has been developed into nearly thousand models among more than hundred series. It has been widely applied in various fields, such as intelligent instrument, real-time industrial control, communication equipment, navigation system, medical equipment, automobile electronics, and home appliance etc. Until now it is hard to find a field without the Single Chip. The structures of circuits cored with the single chip are generally simple. Complex even intelligent functions can be realized through programming. Moreover it is easy to update. Therefore it is the first choice of the engineers in various fields when designing a circuit. This paper introduces the detailed design of a module circuit of the control panel for a DVDRW digital video player. It’s completely based on the single chip and aimed to replace a specific control chipset uPD16316 for the DVDRW digital video player. It is an application design using a low-cost single chip EM78459 and other two chipsets, uPD16312 and HT1380. This paper provides the detailed design of the module circuit and gives out the main hardware circuit and control software. The hardware circuit include: (1) The circuit for uPD16312. (2) The circuit for HT1380. (3) The circuit for remote receiver. (4) The interface circuit between EM78459 and DVDRW main board. The software module design is as follow: (1) The communication module. (2) The system state control module. (3) The display module. (4) The LED display module. (5) The keyboard scan module. (6) The RTC module. (7) The remote code receive module. The design is aimed to solve the problem of the product and cut down the cost as much as possible on the precondition to meet the stability and function of the specification of the product. All of the components in this design are general so that the supply can be guaranteed. It is very suitable for mass production. Keywords: RTC, VFD, MCU, DVDRW PAGE PA