粉煤灰基高温复合相变蓄热材料的制备与性能研究-材料加工工程专业论文.docxVIP

西安建筑科技大学硕士学位论文 西安建筑科技大学硕士学位论文 Study on Preparation and Properties of High Temperature Fly Ash base Phase Change Heat Storage Composite Materials Specialty: Materials Processing Engineering Name: Wang Jianhong Instructor: Hua Jianshe Abstract Phase change heat storage composite materials composite the phase change materials with good corrosion resistance matrix materials, and it is one of the main research direction of the high temperature phase change heat storage materials. Especially ceramic matrix phase change heat storage composite material has large heat storage capacity of phase change materials and excellent high temperature performance of ceramic material. Its application in the field of industrial waste heat recovery, solar energy heat utilization, etc, to solve the mismatch of energy supply and demand in space and time. Therefore, heat storage technology has become an important technology to improve energy utilization rate. In this paper, use of plant waste fly ash as a raw material, and carries on the pretreatment, aluminium powder as phase change materials, was prepared using mixed sintering Al/fly ash high temperature phase change heat storage composite materials. Studied the molding pressure, molding time, sintering temperature and sintering time on the preparation of process parameters on the Al/fly ash of high temperature phase change heat storage composite material performance, finally formulate the sintering system, and analyzed the sintering mechanism of the body material. XRD, TG, DSC, SEM analysis testing technology of material had been used to characterize the structure and thermal properties, and material for the thermal cycle test. Results show that when the content of phase change materials aluminum powder less than 50%, was prepared by mixed sintering Al/fly ash high temperature phase change heat storage composite material with good formability and sintered body tissue distribution even, each phase in the preparation of fly ash and