低伤害酸性压裂液的研制及性能研究-应用化学专业论文.docx

英文摘要 英文摘要 III III Subject ： The preparation of low acid damaged fracturing fluid and study on its properties Speciality： Applied Chemistry Name ： Shen Yanbin (signature) Instructor：Liu Xiang (signature ) ABSTRACT This paper mainly aims at low permeability, water sensitivity and alkali sensitivity reservoir in the fracturing construction process of fracturing fluid and its broken glue during fracturing in the guarantee of performance of fracturing fluid mading sewing, carrying sand performance, temperature and shear resistance , under the premise of that .Synthetically evaluate properties of acid fracturing fluid in the different conditions for finding a kind of the low acid fracturing fluid system for low permeability oil field with low damage. According to the different conditions frozen glue performance testing, while the thickener was carboxymethyl hydroxypropyl guar gum and crosslinking agent was synthetic organic zirconium. Impact of the amount of thickening agent, temperature, acidity and gel breaker on gel-crosslinking were studied.And finally freezing conditions of carboxymethyl hydroxypropyl guar gum under acidic condition was determined.Refering to Recommended practices on measuring the properties of water-based fracturing fluid SY/T 5107-2005 and General technical specifications of fracturing fluid SY/T 6376-2008, comprehensive performance evaluation of two acid fracturing fluid systems were made. Adding the corrosion inhibitor, cleanup additive and clay stabilizer for frozen glue,test effecting on the performance, and concludes that the three kinds of fracturing fluid formula: the mass fraction of carboxymethyl hydroxypropyl guar gum is 0.3% ~ 0.5%, that of corrosion inhibitor is 0.1%, that of row agent is 0.4% ~ 0.6%, that of gel breaking agent is 0.06%. The experimental results show that the rheological property of the three fracturing fluid acid fracturing fluid is good, shear stability and good performance with sand, filtration coefficie