180o翻转机最佳翻转工艺研究.pdfVIP

第41卷 第9期 北 京 工 业 大 学 学 报 Vol.41 No.9 2015年 9月 JOURNAL OF BEIJING UNIVERSITY OFTECHNOLOGY Sept. 2015 核电大型件90毅/ 180毅翻转机最佳翻转工艺研究 陈摇 鹏,孙登月,李海龙,许石民,周玉林 (燕山大学 国家冷轧板带装备及工艺工程技术研究中心,河北 秦皇岛摇 066004) 摘摇 要:为研究核电大型件翻转机的最佳翻转工艺,并进行自身可靠性分析,基于参与研制的某重型机械集团公司 核电大型件翻转机,应用理论解析法,兼顾生产效率与设备安全因素,推导了设备翻转不同类型工件时翻转机关键 工位的最佳旋转角度. 该结果对制定不同类型工件最佳翻转工艺,保证设备安全、高效运行具有重要意义. 关键词:核电大型件;翻转机;最佳翻转工艺 中图分类号:TH6 文献标志码:A 文章编号:0254-0037(2015)09-1314-07 doi:10.11936/ bjutxb2014100050 Research of the90毅/ 180毅 Upender Best Turning Process of Nuclear Power Large Pieces CHEN Peng,SUN Deng鄄yue,LI Hai鄄long,XU Shi鄄min,ZHOU Yu鄄lin (National Cold Rolled Strip Equipment and Process Engineering Technology Research Center, Yanshan University,Qinhuangdao066004,Hebei,China) Abstract:The attitude displacement process of nuclear power large pieces has become one of the important factorsfor improving productivity and enhancing the workpiece爷s surface quality in processing and manufacturing,welding assembly,and non鄄destructive inspection. Therefore,the research of large and heavy鄄load upender is indispensable,but the best flip technology and analyzing of the upender爷s reliability for multifunctional overloading flip is rarely reported at home and abroad. Based on a nuclear large pieces upender,the research was carried out jointly with a heavy machinery factory. With the application of theoretical analysis,consideringproduction efficiency andequipment safetyfactor,thebest rotation angle of upender for different kinds of nuclear power large pieces was obtained. The research plays an important role in providing reference for making the best turning process of different kinds o