圆柱齿轮修形的面齿轮传动系统动态特性-中南大学学报.PDF

46 9 ( ) Vol.46 No.9 2015 9 Journal of Central South University (Science and Technology) Sep. 2015 DOI: 10.11817/j.issn.1672-7207.2015.09.010 1 2 1 (1. 210016 2. 100840) Runge−Kutta 0~0.03 TH132.4 A 1672−7207(2015)09−3231−07 Dynamics characteristics of face gear drive system for modifying pinion 1 2 1 LI Xiaozhen , ZHAO Qingbin , ZHU Rupeng (1. School of Mechanical and Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China; 2. China Nuclear Power Engineering Co. Ltd., Beijing 100840, China) Abstract: In order to improve the dynamic characteristics of face gear drive system, the modified method for pinion was studied, and the equation of the face of the drum modified pinion was obtained. The dynamic model was presented by the concentrated parameter method, which includes modified parameter, backlash, time-varying meshing stiffness, general relative error, brace stiffness, and support damping. The Runge−Kutta numerical integral method was used to calculate the dynamic equation. The results show that increasing the modified parameter will change the dynamics characteristics of the system. When the modified parameter increases from 0 to 0.03, the dynamic characteristics of the system will change from chaos to period bifurcation, and then change from per