《筒体焊接工艺分析》-毕业设计论文（学术).docVIP

精品 Φ3.8×13m水泥磨机筒体焊接工艺分析和工艺设计 摘 要 水泥磨机是水泥厂设备，主要用于HYPERLINK /view/263813.htm 建材、HYPERLINK /view/841179.htm 冶金、HYPERLINK /view/69126.htm 电力及HYPERLINK /view/69802.htm 化工行业，粉磨各种水泥熟料及其它物料。随着我国基础建设的不断发展，水泥需求量越来越大，水泥生产设备向大型化发展，特别是水泥磨机越做越大，结构也有了新的发展，对筒体的焊接要求也更高。 本文主要研究方向是Φ3.8×13m水泥磨机筒体焊接工艺分析和工艺设计。焊接工艺分析主要是对磨机筒体的材料焊接性、筒体结构、生产工艺及技术要求进行分析。工艺设计内容主要有备料工艺设计和焊接工艺设计。备料工艺设计主要包括焊前预处理、切割下料、坡口加工、钢板弯曲等。焊接工艺设计包括焊接方法选择，焊缝位置和形状的设计，焊接顺序的设计，焊接检验的确定。 通过对筒体焊接工艺的分析可知在焊接过程中宜采用分部件焊接的装配顺序，焊接方法采用埋弧自动焊，筒体材料选取低碳钢Q235C，焊材选用φ4的H08A的焊丝与HJ431焊剂匹配。焊接过程中对环焊缝采用米字型支撑梁刚性固定以及对连续的环焊缝采取两段对称施焊的方法来控制变形，对于纵焊缝可以采用预变形法控制变形。焊后焊缝整体在580~620℃回火消除焊接残余应力。 关键词：水泥磨机，筒体，焊接，工艺分析，工艺设计 Welding Procedure Analysis and Procedure Design for the barrel of Φ3.8×13m Cement mill ABSTRACT Cement grinding machine is cement plant equipment, mainly used in building material, metallurgy, electric power and chemical industry, grinding various cement clinker and other materials. With Chinas infrastructure development, the demand to cement is more and more strict and the cement production equipment is developing to the large-scale. Especially cement grinding machine is bigger and bigger. Structures have the new development of the cylinder body welding requirements are also higher. To get the reliable quality and the good performance of cement grinding machine, we should analysis welding process and to work out the reasonable welding process. What this article studies are welding process analysis and the welding process design for the barrel of Φ3.8×13m cement mill. Analysis of welding technology are mainly the analysis of the materal’s weldability, the analysis of barrel structure process and the analysis of the technical condition and production processes. The process design contains the design of preparation process and welding process. The design of welding process contains the selection of welding method, the design of groove, the design of weld position and shape, the design of welding sequence and the check of weld. Through to the a