钢管探伤缺陷高速标记系统设计-机械工程专业论文.docxVIP

华 华 中 科 技 大 学 硕 士 学 位 论 文 II II Abstract With the continuous improvement of the rolling process of steel pipe production line, the speed of pipe production reached 8m / s. To meet the pipe line testing requirements, pipe detection speed has to improve to 3m/s. The defective tag directly displays the results of a pipe flaw data，the high positioning accuracy and resolution of the flaw marking effect are conducive to rapid review of the detection result, and to promote the adjustment of the steel rolling process. Therefore in the process of high-speed steel pipe detection, high-speed marking system is an integral part. In this thesis, taking the demand for high-speed mark performance indicators in nondestructive testing system flaw marker equipment as research-oriented，to develop related specific key technologies of design and research to achieve high-speed mark. First, the overall scheme of the high-speed marking system has been designed, forward model of steel pipe spiral was established in the trajectory and system marking requirements were raised. Through the detection speed and highest mark error the frequency of marking was calculated and the relationship between the identifier of guns arrangement and accuracy have been analyzed, and a promotion that by increasing along with the number of the spray gun to improve the identification precision of the circumferential position was raised. Secondly, the overall structure and the nozzle structure of the identification system were designed, the relationship between nozzle input pressure outlet flow and the exit velocity were simulated, and the flaw that the nozzles that were prone to clogging can be prevented by methods such as continuous printing periodic or adding to water or diluent. Again, the core control system of the high-speed marking system has been designed，the process control has been discussed, the associated delay parameters that affect the implementation of the operation of high-speed marking system ha