AZ31B430 TIGMIG混合焊电耦合行为及连接机制研究.docxVIP

优秀毕业论文 精品参考文献资料 太原理工大学硕士研究生学位论文研究结果表明，在不同焊接参数下， 太原理工大学硕士研究生学位论文 研究结果表明，在不同焊接参数下，TIG．MIG混合焊电弧耦合机制主 要有串联双弧和连续重合电弧两种，而对应的熔滴过渡方式主要有大滴过 渡及搭桥过渡两种形式。与大滴过渡形式相比，TIG—MIG混合焊熔滴搭桥 过渡形式更加稳定，焊缝成型更好。与中间层厚度为0．02mm时相比，中间 层厚度为0．1mm的焊缝成型更好。随着焊接速度的下降，焊接接头强度先 上升后下降。当中间层厚度为o．02mm时，镁合金与不锈钢之间主要是依靠 机械咬合作用结合到一起；当中间层铜为0．1mm时，镁合金与不锈钢之间 的剪切强度主要受中间层铜与不锈钢及镁合金反应的金属间化合物过渡层 的影响。TIG—MIG混合焊焊接镁合金与铁素体不锈钢，焊接接头主要包括： 镁一镁连接、镁一铜连接、铜一铁连接以及镁一铁连接四个区域。 关键词：镁合金，铁素体不锈钢，TIG—MIG混合焊，电弧耦合行为，焊接 稳定性，连接机制 万方数据 太原理工大学硕士研究生学位论文 太原理工大学硕士研究生学位论文 RESEARCH 0N TIG—MIG HYBRID WELDING ARC COUPLED BEHAVIOR A ND JOINING Ⅳ匝CHANISM OF AZ3 1 B／430 AB STRACT Magnesium alloys has the advantage of low density,high specific strength， high heat conductivity,good electromagnetic shielding，good machinability, high impact，good creep resi stance，reproducible and SO on．However,because of its excellent mechanical properties，steel s still occupied the dominant position in the field of industrial production．Stainless steels have the mechanical properties of steel and excellent corrosion resistance，they developed rapidly in recent years．Any new ty’pe of metals applied in industry faced the problem ofjoining with dominant metal．Therefore，the reliability of the magnesium alloy and stainless steel connection decides the development prospect of magnesium alloys in the future．Welding is widely used in industrial production．It is meaningful that welded magnesium alloys and stainless steels． At present，there are a lot of method welding of magnesium alloy and steels， such as laser-TIG hybrid welding，friction stir welding，tungsten argon arc welding，melting inert gas protection welding and SO on．But，little research has been done that the way welding magnesium alloys and stainless steels by indirect arc droplet welding．In this study,we simplified indirect arc droplet welding，adjusted the welding process，and used TIG—MIG hybrid welding magnesium alloys and stainless steels．During the hybrid welding process，it is easy to control the arc behavior．Different a