讲解塑胶产品及模具设计.pptVIP

潛伏式澆口設計 Subgate Design W= w= 澆口寬度 [mm] gate width in mm A= 型腔表面積 [ mm ] surface area of cavity in mm n= 材料常數[ material constant ] 0.6 for PE, PS 0.7 for POM, PC, PP 0.8 for CA, PMMA, PA 0.9 for PVC 澆口厚度[ gate thick. in mm] = nt t= 零件壁厚[ wall thick. in mm ] 2 30? ~ 15o ~ 25o 2 水力直徑 Hydraulic Diameter Where is the hydraulic diameter 水力直徑 A is the cross-sectional area of the flow 流路斷面積 P is the wetted perimeter 濕周長 水力直徑 Hydraulic Diameter 在不同剖面形狀，相同斷面積下之變化 Various runne