基于ITD方法的行波定位应用.doc

第 卷 第 期 电测与仪表 Vol.44 No.504 年 第 期 Electrical Measurement Instrumentation Dec.2007 — PAGE 1 — 第 卷 第 期 电测与仪表 Vol.44 No.504 年 第 期 Electrical Measurement Instrumentation Dec.2007 基于ITD的电网故障行波信息提取新方法 周卿松1，李泽文1，刘四聪2,叶皖2，曾祥君1 (1.智能电网运行与控制湖南省重点实验室 长沙理工大学，长沙 410004；2.广东电网公司茂名供电局，广东 茂名 525000) 摘要:为精确提取行波信号包含的故障信息，提高电网故障行波特征检测的准确度，提出了一种提取暂态行波信息的新方法。该方法采用固有时间尺度分解原理（ITD）分析故障行波信号，将其分解成若干固有旋转分量和趋势余量，提取故障分析所需高频分量，计算各个分量的瞬时相位和频率，精确确定初始行波到达的时间。算例对比和仿真分析结果表明，该方法在局部特征信息保留和分解速度上比经验模态和局部均值分解有优势，用于电网故障定位具有较高的精度和效率。 关键词：行波；固有时间尺度分解；故障定位；精确检测；故障特征 中图分类号：TM773 文献标识码：A 文章编号：1001-1390（2015）00-0000-00 A new extraction method of traveling wave fault information based on intrinsic time-scale decomposition Zhou Qingsong, Li Zewen, Liu sicongZeng Xiangjun,Long Xi, Luo HuiYewan, Zeng Xiangjun, (1. Hunan Province Key Laboratory of Smart Grids Operation and Control, Changsha University of Science and Technology,ChangshaTechnology, Changsha 410004, China; . 2. Maoming Power Supply Bureau of Guangdong Power Grid Corporation, Maoming 525000,Guangzhou, Guangdong, China Abstract: To In order to accurately extract the fault information of traveling wave head signal and improve the feature extraction efficiency of fault traveling wave feature extraction efficiency in power system, a new information extraction method for transient traveling is presented. UseingUsing the principle of intrinsic time-scale decomposition (ITD) to analyze fault traveling wave signal, it decomposes a signal into several intrinsic rotation components and a trend component,andcomponents, and extracts the high frequency component for fault analysis. It is also used to calculate the instantaneous phase and frequency of each component, and the arr