基于PAM-STAMP三通半管拉深成形工艺的模拟-应用昆虫学报.PDF

上半月出版 Casting Forging Welding 金属铸锻焊技术 基于PAM-STAMP 三通半管拉深成形工艺的模拟 贾春莉 张杰刚 张玉强, 李玉梅 刘绍林 郝文龙 渊首都航天机械公司袁北京100076 冤 摘 要院针对一些航空航天 通管件毛坯料厚度薄袁成形后厚度要求严格袁结构复杂 难于成形特点袁对三通半管 拉深成形过程的进行了研究遥 运用PAMSTAMP 模拟软件研究不同参数下半管成形后的厚度和质量袁分析了凹模圆角 半径尧凸凹模间隙尧压边力对零件成形质量的影响袁并获得了最优的工艺参数遥 用于指导生产袁降低了生产周期和成本遥 关键词院三通半管曰PAMSTAMP 曰拉深曰数值模拟 中图分类号院TG44 1.8 文献标识码院A 文章编号院 Numerical Simulation of Drawing Process for Half-three-way Tube Based on PAM-STAMP JIA Chunli, ZHANG Jiegang, ZHANG Yuqiang, LI Yumei, LIU Shaolin, HAO Wenlong (Cap ital A erosp ace Machinery Comp any, Be ij ing 100076, China) Abstract 院The drawing process for half-three-way tube was investigated aiming at the difficult forming characteristics of some three-way tubes in aerospace, for example, the thin thickness of material thickness, the strict request on thickness of product after forming, and the complex product structure. The thickness and quantity of half-three-way tube under different drawing parameters was studied by PAMSTAMP software. The influences of round corner radius of the cavity die, the clearance between punch and die and blank holder force on product forming quantity were analyzed, the drawing parameters were acquired. The produce period and costs can reduc by using the optimum drawing parameters. Key words 院half-three-way tube ; PAMSTAMP; drawing; numerical simulation 三通管件是航空航天飞行器管路结构件中一种 模拟结果中分析零件成形质量尧成形结果-应变分布 常见的结构遥 本文研究的 通管件材料厚度薄袁零 图和材料厚度的分布与变化袁并从中获得较优的工 件成形后厚度要求严格袁 结构复杂遥 该零件主管为 艺参数遥