基于UML和SystemC的软硬件协同设计研究-计算机应用技术专业论文.docxVIP

武汉理工大学硕士学位论文Abstraet 武汉理工大学硕士学位论文 Abstraet As embedded systems being used widely,design methods of embedded system has been developing rapidly．However,there are some problems such as IR)or quality designs，schedule slippages in traditional design of embedded systems．To solve these problems，a hardware／software co-design methodology is put forward． Software／hardware co-design emphasizes software and hardware design ofconcurrent and integrated,overc．,ome8 drawbacks that the traditional design methods bring in through software and hardware design Separately．Through mining the collaborative between hardware and software．it Can achieve efficient work of systems．It c锄also make full use of existing resources，shorten the development periods and reduce the cost and enhance system performance． In recent years，the research of software／hardware co-design is very hot，but typical software／hardware co-design methodology still exist some problems．these problems have limited the software／hardware co-design methods been widely used．In this thesis．based On the study of software／hardware co-design methodolgy,a new more perfect software／hardware co-design method combining witll UML and SystemC for embedded systems is pat forword,缸-thcTlllore，a software／hardware co-design system瑚ing UML and SystemC is preparatorily implemented．At present, software／hardware co-design methodology is still in its early stage，many techniques are not mature and practical yet,but it will bring a revolutionary changes for the design of embedded systems and improve design productivity greatly in the fiJture， the rearch ofsol,rare／hardware co-design would be ofgreat significance． Firstly,the basic concept of software／hardware CO-design and the present research situation worldwide is introduced,the techniques are also discussed separately in the thesis，which is in the system description stage，system architecture design stage，hardware／software design and implementation stage．Secondly, combined wim three representativ