四列圆柱滚子轴承游隙说明.pptVIP

* The operating RIC should approximately develop a 180o load zone. This will optimize the contact stress (i.e. minimize) seen on the maximum loaded roller. Normal operating RIC falls between 0.001”(0.0254mm) and 0.002”(0.0508mm). If thermal gradients are large, the operating RIC may need to be increased which in turn implies a larger Cold (Unmounted) RIC. 轧机轴承精度、游隙及配合 1、轴承精度 主要是根据轴承零部件对旋转精度的要求以及对轴承寿命的要求来确定轴承精度等级。推荐的精度等级参考下表： 主机类型 四列圆柱滚子轴承 止推轴承 配套精密冷带轧机 P5 P0 普通冷带及热带轧机 P5或P6 P0 开坯及精轧机 P6或P0 P0 精轧机组 P5或P6 P0 中轧机组 P6或P0 P0 橡塑开炼机 P6或P0 P0 橡塑压延机 P5 P0 轧机轴承精度等级提高了，虽然轴承单套成本提高，但是带来了以