基于powerlink的热网监控系统设计与实现-控制理论与控制工程专业论文.docxVIP

内蒙古科 内蒙古科技大学硕士学位论文 II II Abstract With the development of science and technology, Heating Network Monitoring System has been got a lot of promotion and application in the northern cities. Currently, commercial Heating Network Monitoring System use the fieldbus as the underlying communication protocol, compared with fieldbus industrial Ethernet has a high-speed, and high reliability , represents the latest technology trends. In this paper, research one kind of the real-time industrial Ethernet protocols based on Powerlink , use STM32 MCU design and implement a Powerlink master and slave control unit, and apply it to the Heating Network Monitoring System. Powerlink has the advantages of high reliability, real-time, low-cost and easy to realize the distributed control. It makes a useful exploration in Industrial Ethernet application and promotion to the thermal station monitoring system. The thesis first introduced the concept of the development process of Heating Network Monitoring Systems and industrial Ethernet, Secondly, Analyzes the principle Powerlink protocol stack, After analyzing the overall structure of the Heating Network Monitoring System, designing the overall architecture of Heating Network Monitoring System based on Powerlink. The system includes monitoring center and the thermal station control unit, the thermal station control unit includes master and slave nodes. Control system design including the master, slave Hardware and software design, software design, which includes Powerlink protocol stack transplant And Heating Network Monitoring application design. Master and slave controllers all achieved using STM32F407VGT6, Data transfer between master and slave is achieved through Powerlink, use the master node to complete the task scheduling polling and other related functions from nodes, slave node collects temperature, pressure and other signals from the sensor and transmits them through the object dictionary to the master controller . Heating ne