Q_ASTM A941-2017钢、不锈钢、合金和铁合金术语.pdf

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. Designation: A941 − 17 Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys1 This standard is issued under the fixed designation A941; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (´) indicates an editorial change since the last revision or reapproval. 公 开 1. Scope aging, n—a change in the properties of certain steels that 2 occurs at ambient or moderately elevated temperatures after 0 1.1 This standard is a compilation of definitions of terms 1 hot working or a heat treatment (quench aging, natural 8 related to steel, stainless steel, related alloys, and ferroalloys. 年 aging, or artificial aging) or after a cold-working operation 1 1.2 When a term is used in an ASTM document for which 0