基于AT89C51单片机的花样彩灯仿真分析.docVIP

. PAGE . 物理与电子信息学院 课程设计Ⅳ 基于AT89C51单片机的花样彩灯 姓名： 班级： 电子科学与技术 学号： 指导老师： 时间： 2011年1日6日 目 录 TOC \o 1-2 \h \z \u HYPERLINK \l _Toc282249805 内容摘要 PAGEREF _Toc282249805 \h 1 HYPERLINK \l _Toc282249806 关键词 PAGEREF _Toc282249806 \h 1 HYPERLINK \l _Toc282249807 Abstract PAGEREF _Toc282249807 \h 1 HYPERLINK \l _Toc282249808 1绪论 PAGEREF _Toc282249808 \h 1 HYPERLINK \l _Toc282249809 2 系统设计 PAGEREF _Toc282249809 \h 2 HYPERLINK \l _Toc282249810 2.1 设计任务与要求 PAGEREF _Toc282249810 \h 2 HYPERLINK \l _Toc282249811 2.2 方案的选择与论证 PAGEREF _Toc282249811 \h 2 HYPERLINK \l _Toc282249812 3 系统硬件设计 PAGEREF _Toc282249812 \h 2 HYPERLINK \l _Toc282249813 3.1 控制器模块 PAGEREF _Toc282249813 \h 3 HYPERLINK \l _Toc282249814 3.2 按键模块 PAGEREF _Toc282249814 \h 5 HYPERLINK \l _Toc282249815 3.4 LED显示模块 PAGEREF _Toc282249815 \h 5 HYPERLINK \l _Toc282249816 3.5硬件元件清单 PAGEREF _Toc282249816 \h 6 HYPERLINK \l _Toc282249817 4软件设计与仿真 PAGEREF _Toc282249817 \h 6 HYPERLINK \l _Toc282249818 4.1主程序设计 PAGEREF _Toc282249818 \h 6 HYPERLINK \l _Toc282249819 4.3 仿真结果 PAGEREF _Toc282249819 \h 8 HYPERLINK \l _Toc282249820 4.4 系统调试 PAGEREF _Toc282249820 \h 9 HYPERLINK \l _Toc282249821 4.5 误差分析 PAGEREF _Toc282249821 \h 9 HYPERLINK \l _Toc282249822 结束语 PAGEREF _Toc282249822 \h 10 PAGE 17 内容摘要： 随着电子技术的迅速发展，单片机得到了越来越多的应用。本设计用单片机89S51结合LED（发光二极管）制作了一个广告移动彩灯，它由一块89S51组成，通过逐次扫描其中一块的P2.0--P2.7口，从而依次实现彩灯轮流点亮、逐点点亮、间隔点亮。 关键词：LED彩灯；AT-89C51单片机；彩灯控制器 Abstract：Along with the electronic technology rapid development, the monolithicintegrated circuit obtained more and more many applications. Here Iused monolithic integrated circuit 89C51 to unify LED (light emitterdiode) to manufacture a belt music broadcast function advertisementmigration colored lantern with the loudspeaker, it was composed by two89C51, through gradually scanned together P3.0--P3.2 mouth, judgedwhether had the pressed key to press down, unified the port scanningand the pressed key