毕业设计（论文）合肥某商用建筑的空调设计.docVIP

河南理工大学本科毕业设计（论文） 摘 要 PAGE \* MERGEFORMATII 摘 要 该设计为合肥某商用建筑的空调设计。该建筑位于合肥市，建筑总层数12层,层高3.9m，建筑总高度46.8m，总建筑面积11727㎡。本次设计目的是根据所学基础理论和专业知识，结合本工程实际，设计出合适的空调系统,以满足房间人员的舒适性要求。主要内容有：系统形式的选择、冷负荷计算、房间风量的计算和风管设计计算、房间气流组织计算、水系统设计及相应的水力计算；设备选型和布置等。在本次设计上侧重于中央空调系统设计并且暂不考虑冬季制热问题。根据房间的功能和设计要求，1至3层为商场、餐厅等大空间人员集中区域，空调系统采用全空气系统，4至12层为酒店客房区域，风系统采用风机盘管加独立新风系统。 关键词：负荷计算；全空气系统；风机盘管；独立新风系统；水力计算；设备选型 河南理工大学本科毕业设计（论文） Abstract Abstract The main content of the graduation project is the central air-conditioning design engineering of a 12-storey commercial building. The building is located in Hefei,Anhui province,a total of 12 layers, floor hight 3.9m , a total height of 46.8m, the total construction area of 11727㎡. The purpose of this project is based on the basic theory and professional knowledge, combined with the engineering, to design appropriate air-conditioning system that allows people a comfortable air environment. The main contents are: the option of system form, the cooling load calculation, the calculation of room air flow and wind design calculation, calculation of room air distribution, water system design and hydraulic calculation of the corresponding, such as equipment selection and layout. In this，I focuse my most energy on the design of central air-conditioning system and take little attention on the issue of winter heating. According to the room function and designing requirements, this project use Fan coil and Independent fresh air System in hotel rooms,and All-air system from1 to 3 floor which contains lots of people with huge space Key words: load calculation; Fan coil; Independent fresh air system; hydraulic calculation; Equipment selection 河南理工大学本科毕业设计（论文） 第一章 绪 论 PAGE \* MERGEFORMATV 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc3671 摘 要 PAGEREF _Toc3671 I HYPERLINK \l _Toc3439 目 录 PAGEREF _Toc3439 III HYPERLINK \l _Toc26128 第一章 绪 论 PAGEREF _Toc26128 1