基于arm和c8051f206的ppln电光滤波器控制系统-通信与信息系统专业论文.docxVIP

  • 0
  • 0
  • 约4.17万字
  • 约 57页
  • 2019-01-09 发布于上海
  • 举报

基于arm和c8051f206的ppln电光滤波器控制系统-通信与信息系统专业论文.docx

基于arm和c8051f206的ppln电光滤波器控制系统-通信与信息系统专业论文

摘要进入新世纪,通信网正在向下一代网络(NGN,New 摘要 进入新世纪,通信网正在向下一代网络(NGN,New Generation Network) 发展,密集波分复用技术(DWDM)对光网络内传输信号的功率均衡性有了更 高的要求。掺铒光纤放大器(EDFA)中铒纤固有的放大自发辐射(ASE)不平 坦特性及其在系统中的级联累积效应使其增益失衡加剧,限制DWDM系统的长 距离传输,解决的方法就是对其进行功率均衡。当前的功率均衡主要来源于 EDFA中动态增益均衡器(DGE)的概念,分为串行工作和并行工作两类。从技 术层面来看目前的动态功率均衡技术还存在工艺复杂、成本太高,而且通过声光、 热光、液晶等技术来实现存在响应速度偏慢问题,对于超高速系统中微秒量级的 功率瞬变显得无能为力,可靠性和重复性较差。 为此本论文提出一种新型基于PPLN的自适应功率均衡系统的解决方案,并 完成了其中的数据处理单元,以及功率谱监测单元中A/D模块的软硬件前期设 计实验仿真工作。该方案包括功率谱监测单元、微处理器控制电路及软件、基于 级联周期极化铌酸锂(PPLN)体光栅效应的电光可调滤波单元三大部分。完成 部分中,A/D模块负责光信号的光电、数模转换;数据处理单元接收上路功率谱 监测单元实时测量采样来的数据,拟合出连续的谱线,计算出实现功率均衡所需 的目标滤波传递函数,然后通过Levenberg.Marquardt算法优化电光可调滤波器 的控制参数。该功率均衡系统具有光谱响应特性好、响应速度快、残余功率波动 小、动态范围大、功耗小的优点。对完成部分进行的实验仿真也表明,系统具有 可行性,可以达到设计要求。 关键词: 动态功率均衡周期极化铌酸锂ARM C805 1F206 L.M算法 ABSTRACTIn ABSTRACT In the new century,the communication network was developing to New Generation Network(NGN).As the technology of Dense Wavelength-Division Multiplexing(DWDM),it is more important of power equalization of signal transport in fiber optic network..The unevenness of Amplified Spontaneous Emission(ASE) of Erbium—doped Fiber Amplifier(EDFA)and its cumulation made gain unbalance morg worse.This will limit the long—distance transport of DWDM.Today’S power equalization is from the concept of Dynamic Gain Equalization(DGE)of EDFA. There are still some disadvantages:complex technology、high COSt、slow response (implemented by acousto-optic、heat—optic、liquid),can’t be applied in hypervelocity system,reliability repeatability bad. This thesis gives the new solution of Dynamic power equalization system and completes the signal—processing part and the A/D module of power spectrum monitoring part.The system make up of power spectrum the monitoring pan、the microprocessor control circuit and software、the photovoltaic tunable filter base on Periodically Poled Lithium Niobate(PPLN)diffraction grating.The signal processing pan use LPC22 1 0 and the A/D module used C805 1 F206 are finished.The microprocessor used for processing the signal fro

文档评论(0)

1亿VIP精品文档

相关文档