Shale gas (oil) Reservoirs factors(页岩油气藏的影响因素）.pptVIP

* Add the size of pore size * Vitrinite: 腐植型-镜质体; bituminite: 沥青质; alginite: * Add the size of pore size * Cc=cubic centimetre? (SI unit symbol:?cm3;?1?cm3?≡ 1?ml. * Add the size of pore size * Adsorb: 吸附 * Add the size of pore size * Porosimetry?is an?analytical technique?used to determine various quantifiable aspects of a materials?porous?nature, such as?pore diameter, total?pore volume,?surface area, and?bulkand absolute?densities. * Diffusion: 扩散 * 1-Constant parameters- understand the coupled effects of fracture permeability, matrix size, and matrix permeability on the gas flow 2-Introduce different stress-dependent permeability models to further investigate their effect with more experimental data 3-compare the model results to field cases and apply the model to specific basins * 56. Effects of Matrix PermeabilityProduction ... example of the results of our simulations- plot showing how the production rate varies with changing matrix permeability for a shale with a fracture spacing of 20 cm and a fracture permeability of 5md. Varying the matrix permeability from 5e-5 to 5e-7 md does not have much affect on the production rate, which indicates that the production is independent of matrix permeability. If we further increased the matrix permeability we would not see an increase in the production rate. But once the matrix permeability is lowered below 5e-7 we see a large relative decrease in the production rate for the well, indicating that the matrix permeability is production-limiting.  * 57. Effects of Matrix Permeability plots showing how the production rate (left) and cumulative production (right) varies with matrix permeability for a shale with fracture spacings of 5 cm (above) and 1 m (below). Results are similar to the case with a 20 cm fracture spacing except that for a spacing of 5 cm, production is limited by the matrix permeability for values less than 5*10^-8 versus 5*10^-5 for a spacing of 1 m. Therefore production from reservoirs wit