- 7
- 0
- 约5.72万字
- 约 98页
- 2019-01-09 发布于上海
- 举报
基于ccsds的火星探测器测控通信系统链路分析与设计-电子与通信工程专业论文
上海交通大学工程硕士学位论文摘要
上海交通大学工程硕士学位论文
摘要
第
第 I 页
基于 CCSDS 的火星探测器测控通信系统链路分析与设计
摘 要
火星探测是一项极其复杂且风险极高的航天工程。如何确保探测器在 遥远的火星能顺利完成各项使命,测控通信系统在其中扮演了星地间信息 纽带的关键角色。
本文根据课题来源的某火星探测器测控通信系统的基本设计输入条 件入手,先从物理射频信道层面,进行了输入条件下的上、下行全链路的 基本链路预算,提出了创新性的码速率切换方式;再在基本链路预算的基 础上,进一步根据探测器实际在轨飞行轨道,对探测器对地距离、通信码 速率效能情况进行仿真分析,并由此确定火星探测全过程的码速率切换方 案;其中最主要的是,通过对各地面站的可见性、可见时间的仿真分析, 确定了各飞行阶段地面站支持方案;此外,还分析了绕火段执行科学探测 任务时期,探测器对地测控通信受日凌和火星遮挡的影响程度,以及探测 器全寿命期内 VLBI 测轨支持的有效性等。
本文通过系统通信链路的仿真和分析,为器载测控通信系统进入全面 的工程设计提供了依据,计算了通信距离、天线形式、数据传输及编码调 制方式等对通信链路的影响,分析了探测器在轨道飞行过程中将遇到的主 要空间场景,并对这些场景下的通信效能分别进行了具体分析和计算,由 此确定了最佳的系统参数设置。
第
第 II 页
通过本文的分析和计算,确定了探测器开展火星探测全过程中对地通
信最关键的几个方面内容,对探测器对地测控通信的链路效能进行了充分 的预计和评估,并以此作为卫星方与其它如运载方或地面测控系统等方面 协调的依据。
关键词:火星探测器,测控通信系统,通信链路,CCSDS
上海交通大学工程硕士学位论文AB
上海交通大学工程硕士学位论文
ABSTRACT
第
第 PAGE IV 页
THE LINK ANALYZATION AND DESIGN BASED ON CCSDS FOR MARS PROBE TTCC SYSTEM
ABSTRACT
Mars exploring is a very complicated and risky aerospace engineering. How to ensure that the probe in the huge distant can still finish the mission, TTCC system plays the key role in the information transporting between probe and earth.
This paper comes from the subject of a Mars probe. Conditioning of basic design input of the subject’s TTCC system, this paper first discussed the basic the updown link’s budget under the physical radio channel; then further, according to the probe’s actual orbit, make the simulation and analysis for the distance between the spacecraft and earth, the performance of communication data rate, and thus to define the entire process of the data rate switching scheme; and the most of all, based on the simulation analysis of the visibility time of the station, to identify ground stations supporting plan fo the various flight stage; finally, make the analysis for the communication availability degree influenced by the solar conjunction and the shelter of the Mars, and the scientific exploration period that around the Mars, and the supporting availability of VLBI measurement in the probe’
您可能关注的文档
- 基于3c技术的智能摊铺机设计与分析研究-机械工程专业论文.docx
- 基于arm架构的信息预处理技术研究-机械电子工程专业论文.docx
- 基于ct图像构建颅骨三维模型及颅骨凹陷性骨折的有限元分析研究-人体解剖与组织胚胎还专业论文.docx
- 基于contourlet变换的医学图像增强与分割的研究-信号与信息处理专业论文.docx
- 基于bp神经网络的销售预测模型-电子与通信工程专业论文.docx
- 基于contourlet变换的医学图像增强与分割的分析-信号与信息处理专业论文.docx
- 基于agent的主分馏塔粗汽油产品质量控制及仿真-控制理论与控制工程专业论文.docx
- 基于fpga的表面缺陷在线检测系统应用研究-电路与系统专业论文.docx
- 基于fpga及niosⅱ的多轴数控系统设计-控制理论与控制工程专业论文.docx
- 基于bim和系统集成思想的工程项目成本信息管理研究-管理科学与工程专业论文.docx
原创力文档

文档评论(0)