基于arm主控芯片的微型热敏打印驱动及系统设计-光学工程专业论文.docxVIP

浙江大学硕士学位论文 浙江大学硕士学位论文 基于ARM主控芯片的微型热敏打印驱动及系统设计 Abstract With the rapid development of economy and information communication technology,the printers，as the convenient output equipments，have been applied to the commodity circulation， traffic transportation，industrial control，and many other fields．However,the traditional printers Can not meet the requirements both in performance and functions from new applications． The thermal printer,as a new type of product，is very attractive to the customers诵tll its advantages such as fast speed，high quality,low noise，easy miniaturization，convenient maintenance，simple operation，and fine cost—effectiveness，SO it has been widely applied in the developed countries as United States and Japan．Meanwhile，with the development of microelectronic technology,the embedded chips，for its high performance and low price，have gradually become the preferred control chips in the smart instruments．Subjecting to the new market demand and combining the thermal printing and control technology,a new design of thermal mini．printing driver and its system was studied in this dissertation based the ARMTTDMI kernel chip S3C44BOX． The control principle of the thermal printing system and the advantages and disadvantages of the current designs were analyzed and compared，upon which the design scheme of this study Was proposed，including hardware，software，and testing of the thermal printing system as described in this dissertation． Based on the deep discussion of the features of thermal head and control chip，the hardware system of printing driver was determined with the aim to simplify the whole system， to improve its integration and reliability,and easy to develop the software．111e driver hardware was made up of several modules，including interface circuit，state detection module， step—motor driving module，accident protection module，and power supply module．For the software system，according to the development principle of embedded system software and the characteristic