分析杭州西溪液压升船机集控系统设计.pdfVIP

  • 6
  • 0
  • 约1.14万字
  • 约 4页
  • 2019-01-11 发布于湖北
  • 举报

分析杭州西溪液压升船机集控系统设计.pdf

学兔兔 水利水电技术 第45卷 20l4年第1期 杭州西溪液压升船机集控系统设计 车晓杰,吕 科 (华电电力科学研究院,浙江 杭州 310030) 摘 要:通过分析杭州I西溪液压升船机的特点,确定了液压升船机集控系统的设计思路和设计原则, 提出了采用分层分布式结构的集控系统方案。经长期运行证明,该系统可靠、安全、实用,为今后类 似设计提供了参考。 关键词:液压升船机;集控系统;电气传动 中图分类号:U642 文献标识码:B 文章编号:1000—0860(2014)01.0065—04 Design of concentrated control system for hydraulic shiplift of Xixi River in Hangzhou CHE Xiaojie,LU Ke (Huadian Electric Power Research Institute,Hangzhou 3 10030,Zhejiang,China) Abstract:Through the analysis made on the characteristics of the hydraulic shiplifl of Xixi River in Hangzhou,the concept and principle for the design of the concentrated control system for the hydraulic shiplift are determined herein,and then the scheme of the concentrated control system with the layered and distributed structure is proposed as wel1.It is demonstrated through a long— term operation that the system is reliable,safe and practical,and thus can provide a reference for the similar design. Key words:hydraulic shiplifi;concentrated control system;electric drive 系的通航建筑物。升船机等级为Ⅶ级。 1 引 言 2.1 主要技术指标 升船机作为一种过坝设施,运行效率高,耗水 (1)通航保证率90%;(2)全年通航时间325 d; 量低,在一些发电为主的高坝枢纽得到了广泛的应 (3)日使用时数10~12 h;(4)每天运行次数≥60 用。目前国内升船机多应用于水电站附近,上下游 次;(5)每次通过船只2艘;(6)游船型尺寸7.5 m x 落差大,过船吨位重,一般采用卷扬提升结构。近 2.0 m(长×宽);(7)游船最大吃水深0.5 1TI;(8)载 几年旅游行业兴起,游船业务发展较快,对小型过 客人数6(人/船);(9)日通过游客流量≥160人(双 坝设施提出了要求。这种过坝设施应用于城市水利 向);(10)上游最高通航水位3.90 in;(11)上游最 改造和旅游风景区,上下游水位落差小,

文档评论(0)

1亿VIP精品文档

相关文档