基于fan7554的多路恒流led驱动电源设计-电力电子与电力传动专业论文.docxVIP

摘要 摘要 摘要 绿色光源的观念逐步深入人心，LED 以其高效节能、长寿命、安全可靠的优 势逐步深入通用照明领域，但与 LED 照明相适应的驱动技术也成为其性能发挥的 制约因素，对 LED 驱动的研究成为热点。论文以某实际应用为背景，研究和设计 多路输出 LED 驱动电源。 针对 LED 应用于投射灯的设计需求，设计了一台 3 路输出 30W 的 LED 投射 灯驱动电源。在分析和比较了几种现有方案的基础上，详细阐述了 LED 驱动电源 的需求分析，设计了驱动电源的体系结构，选择 AC/DC 隔离型恒流输出方案，采 用三路并联式驱动输出模式；详细设计了相关功能电路，并完成了各电路和元件 的参数计算，奠定了优化设计的基础；重点研究了三路 LED 灯在并联情况下的恒 流技术，解决实际应用中所存在的各路电流不均衡性以及由此导致的应用问题； 应用 Saber 软件对驱动电源进行了建模仿真，给出了仿真结果，验证了设计方案的 可行性。 模拟仿真及分析结果表明，电源效率为 83%，功率因数为 0.875，纹波为 1.2%， 电源性能指标达到了课题设计的要求。 关键词：LED 驱动 反激式 高频变压器 多路恒流 Abst Abstract Abstract The concept of green light gradually enjoys popular support, LED gradually goes deeply into general lighting field with the advantages of high efficiency, energy-saving, long life, safe and reliable, but the drive technology which adapts to LED lighting has become a restriction factor of its performance, as a result, the research of LED driver becomes hot pints. In the paper, as the background of taking a practical application, researching and designing a multiple output LED drive power supply. According to the design requirements of LED applied in electroscope, design a three-channel output 30w LED electroscope drive power supply. On the basis of analysis and compare several existing scheme, descript LED drive power requirements analysis in details, design the drive power supply system structure, choose the output plan of AC/DC isolation type constant-current, the drive output mode is three-channel parallel; Design the relevant function circuits in details, and complete the calculation of circuit and the element parameter, it lays the foundation for the optimization design of the foundation; Emphases research constant-current technology of three LED electroscope under the condition of working in parallel, and solve the current malconformation and its application problem of practical applications; Use Saber to drive power modeling simulation, the simulation results are given to demonstrate the feasibility of the design scheme. The results of simul