机械专业毕业设计论文..docVIP

兰州交通大学毕业设计（论文） 毕业设计（论文） 装载机工作装置运动设计与仿真 学科、 专业： 学 号： 作 者 姓 名： 指 导 教 师： 兰州交通大学毕业设计（论文） PAGE \* MERGEFORMATI 摘 要 装载机是一个通常用于建筑的重型设备，主要用于将材料（等asasphalt，拆除杂物，灰尘，雪，饲料，砾石，原木，矿物原料，再生材料，岩石，沙，木屑）装入另一种类型的机械（如自卸车，输送带，进料斗，或车厢）。它对于减轻劳动强度，加快工程建设速度，提高工程质量起着重要的作用。随着我国制造业的发展，对于装载机的设计和制造的要求也越来越高，而传统的设计方法存在很多不足，如设计周期长，设计质量差，设计费用高，不能反映整个结构的应力分布，很难满足客户需求。 本文首先主要介绍了课题的研究背景，装载机的发展趋势及设计方法，分析了装载机的总体构造，对装载机工作装置作了简要介绍；然后利用三维设计软件SolidWorks完成了对装载机工作装置的三维设计，建立整机结构模型并进行运动仿真，了解实际工作情况。最后利用SolidWorks自带插件SolidWorks Simulation对装载机主要承受载荷的部件进行静力分析，分析其变形与受力情况，以便能对其进行更好的优化设计。 关键字：装载机；三维设计；有限元分析 Abstract Loader is a heavy equipment normally used in construction, Mainly for the material (like removal of debris, dirt, snow, feed, gravel, wood, mineral materials, recycled materials, rock, sand, sawdust) into another type of machine (truck, conveyor, into hopper, or car). It is to reduce labor intensity, speed up the construction speed, improve project quality plays an important role. With the development of Chinas manufacturing industry, the requirements for the design and manufacture loaders are also increasing, while the traditional design method has many deficiencies, such as long design cycles, poor design quality, high design costs, does not reflect the whole structure stress distribution, it is difficult to meet customer needs. This paper first introduces the research background, trends and design issues loaders, analyzes the overall structure of the loader, loader working device for a brief introduction; Then use the three-dimensional design software SolidWorks completed the loader working device 3D design, build the whole structure and motion simulation model, to understand the actual work; Finally, the use of static analysis plug-ins SolidWorks Simulation SolidWorks comes to bear on the loader loads the main component analysis of the deformation and stress conditions in order to be better