《20m双体搜救船设计及快速性计算船舶与海洋工程毕业设计》-毕业设计（论文）.doc

PAGE 31 PAGE I 20m双体搜救船总体方案设计及快速性计算 摘要 本课题为设计一艘20m双体搜救船,设计主要内容为主尺度论证、总布置设计、三维建模、型线设计、稳性校核、快速性计算及螺旋桨设计。 确定双体搜救船的航区,航速等之后,进行双体搜救船的主尺度论证，根据主尺度进行双体搜救船的总布置设计，在总布置设计中参照母型船进行设计改造。接着使用maxsurf的maxsurfpro模块进行三维建模、光顺模型，然后导出型线,进行型线的完善。之后通过maxsurf的Hydromaxpro模块进行静水力的计算以及大倾角稳性的校核。最后利用maxsurf的Hullspeed模块进行快速性计算，进而进行螺旋桨的设计。 关键词： 双体搜救船，总布置，三维模型,型线，静水力，螺旋桨  The Design of 20m Catamaran Rescue Vessels and Fast Calculation Abstract The topic for the design of a 20m catamaran rescue vessels, the design of the main contents of the main-scale demonstration, the overall layout design, three-dimensional modeling, model design, calibration stability, quick calculation and propeller design. Twin-hull vessel to determine the aircraft search and rescue area, after the speed, etc. to carry out search and rescue boat catamaran-scale demonstration of the Lord, according to the main-scale search and rescue boat catamaran to the overall layout of the design, layout design in the light of the overall home-based transformation of ship design. Then use the maxsurfpro module maxsurf three-dimensional modeling, smoothing model, and then export the profile to carry out the perfect lines. After the adoption of the maxsurf Hydrostatic Hydromaxpro modules as well as the calculation of large angle stability check. Finally, the maxsurf rapid Hullspeed calculation module,which carried out the design of the propeller. Keywords: catamaran rescue vessels General arrangement Three-dimensional model Lines Hydrostatic Propeller  目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc232183416 一 选题背景 PAGEREF _Toc232183416 \h 1 HYPERLINK \l _Toc232183417 1.1 太湖环境介绍 PAGEREF _Toc232183417 \h 1 HYPERLINK \l _Toc232183418 1.2 船型选择 PAGEREF _Toc232183418 \h 2 HYPERLINK \l _Toc232183419 1.3 存在的技术问题 PAGEREF _Toc232183419 \h 2 HYPERLINK \l _Toc232183420 1.4 国内外的研究情况及双体船的发展前景 PAGEREF _Toc232183420 \h 3 HYPERLINK \l _Toc232183421 二 主尺度论证 PAGEREF _Toc232183421 \h 3 HYPERLINK \l _Toc232183422 2.1 设计任务书的分析 PAGEREF