一种基于数字图像处理粗指针仪表读数识别方法.PDFVIP

Computer Science and Application 计算机科学与应用, 2013, 3, 195-201 /10.12677/csa.2013.34034 Published Online July 2013 (/journal/csa.html) A Method of Recognizing the Thick Pointer Instrument’s Numerical Reading Based on Digital Image Processing 1 1 1 2 2 Zhongyi Sun , Li Kang , Ku Wang , Hongtao Zai , Ruiping Tian 1College of Information and Electrical Engineering, China Agriculture University, Beijing 2Jincheng Power Supply Company, Jincheng Email: sunzhy168@126.com Received: May 1st th rd , 2013; revised: May 19 , 2013; accepted: Jun. 3 , 2013 Copyright © 2013 Zhongyi Sun et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unre- stricted use, distribution, and reproduction in any medium, provided the original work is properly cited. Abstract: The oil-level dial of transformer is the key device to detect the state of transformers in the transformer sub- station, and the digital image recognition technology is an effective way to accurately obtain the oil-level dial’s numeri- cal reading. As to the inaccuracy, low reliability and bad real-time performance of the traditional image-based dial reading systems, according to the image features of oil-level dial, a segmentation algorithm based on the future knowl- edge of the connected region’s area is proposed. And based on this algorithm an oil-level dial reading method is imple- mented. The experimental results of Matlab simulation show that our method is better to segment the pointer from the background of the oil-level dial images, laying a foundation to accurately judge the reading of th