基于arm的矿井提升机后备保护器的设计与实现-信号与信息处理专业论文.docxVIP

Subject : Design and Realization of Protection System for Hoist Based on ARM Specialty : Singnal and Information Processing Name : Cheng Wang-sheng （Signature） Instructor : Ni Yun-feng （Signature） ABSTRACT In order to guarantee the safe operation of the hoist, a protection system for the hoist based on ARM9 and Linux is designed. The complete developing process of the protection system is discussed on details. The important function of the hoist is summarized, and the necessity of developing protection system is clarified. By analyzing of the available back up protection system of the hoist, there are so many problems which need to be solved, such as difficult function extension, inflexible human-machine interfaces, lack of remote monitoring and so on. On this basis, the protection system for the hoist based on ARM-Linux is designed. S3C2440 is used as the core processor of the protection system, which has the advantages of low power, high speed process, and rich internal resources. Linux is used as the operation system, which has the advantages of supporting network communication, supporting kinds of hardware platform, easy portability, high modularization, easier development and so on. The protection system has many characteristics, such as multitask, strong real-time, easy expansion of functions, remote monitoring. There are many protection functions in this protection system, including over-voltage protection, over-current protection, speed limit protection and over-wind protection. The over-voltage and over-current protection is implemented by ADC and converter of current and voltage, and over-wind and speed limit protection is realized by hall rotational speed sensor. The human-machine interaction becomes more flexible because of LCD, Touch screen and GUI, which also increases the production efficiency. GPRS that is the main part of the wireless transmission is used, with which the remote monitoring of hoists is realized. Comparing with wired transmission