传输零点在平面微带滤波器中的应用-研究.doc

ABSTRACT ABSTRACT Microwave filters are essential components in wireless communication system. As the further development of modern communication system, such as the applications of GPS, Wi-Fi, WLAN, Bluetooth, WiMax and etc, the demands of microwave filters with good performance are urgent. In this thesis, the structural compactness, passband selectivity and out-band suppression of microstrip filters are discussed and analyzed. The main contents are: The background and significance of this thesis are investigated. The current researches and development trends are introduced briefly. Then, based on the existed work, the research contents of this thesis are proposed. The basic theories of microwave filter, including the design method of traditional lowpass prototype filters, frequency and element transformations from lowpass prototypes to actual filters, the application of conventers in filter design and the coupling characteristics of resonators, are introduced respectively, which will be the foundations of the following researches. Design of single-band bandpass filter based on stepped-impedance resonators. First, the characteristics of stepped-impedance resonators (SIR) and anti-parallel coupled lines (APCL) are analyzed respectively. Then, a single-band bandpass filter based on SIR and APCL is designed. And its frequency responses with different structures are discussed. Design of single-band bandpass filter based on source-load cross coupling. First, a traditional single-band bandpass filter with source-load cross coupling is designed and the causations of transmission zeros are analyzed. Then, based on the above discussion, single-band bandpass filter with stub-loaded source-load cross coupling is proposed. Its advantages are demonstrated by two filters structure with passbands located at different frequencies. Design of dual-band bandpass filter based on source-load cross coupling. First, based on the single-band filter designed before, dual-band bandpass