基于光栅条纹投影的三维测量系统标定方法的研究-光学工程专业论文.docxVIP

优秀毕业论文 精品参考文献资料 研究生优秀毕业论文 AbstractIn Abstract In recently years，the method of using fringe pattem projection surface profile research has become popular in the field of optical measurement．The technology of based on fringe pattem projection of high--speed real··time 3-D surface measurement has been widely used in the field of industry,medicine，scientific．And as the basis of 3-D measurement system，the system calibration is all essential part of 3-D measurement system before measuring steps，the accuracy and precision of the system calibration will directly affect the measurement accuracy and precision in the process of 3-D measurement system．And the execution and complexity of the 3-D measurement system calibration，will affect the trial conditions and the scope of 3-D measurement system directly．Therefore，this paper mainly studies calibration method based on fringe pattem projection high—speed real—time 3-D measurement system，in purpose to seek simple，high precision，high speed of system calibration method．In addition，in order to improve the speed of 3-D measurement system，this paper do some relevant research in absolute phase extraction method and lookup table algorithm．The main research content is as follows： Detailed analysis of principle of phase-shifting method and temporal，spatial phase unwrapping algorithm，and analyze bi-frequency phase shift algorithm which Our group put forward based on three．step phase—shifting method and temporal phase unwrapping algorithm， this algorithm Can effectively improve the speed of acquiring absolute phase．According to the relationship among the world coordinate system，camera coordinate system，image physical coordinate system and image pixels coordinate system which based on the camera mathematical model．On the basis of the principle of the pin—hole imaging，linear camera model is set up，at the same time，on this basis we pull—in the camera lens optical distortion，to build a more perfect nonlinear imaging model of camera．This paper