小油壶盖注射模设计.docVIP

学 号 毕业设计(论文) 题目： 小油壶盖注射模设计 摘 要 本设计基于塑料成型的基本原理，特别是单分型面注射模具的工作原理，应用计算机辅助制造设计方法，对小油壶盖注射成型模具进行了设计。对制件进行了详细的分析，制件采用材料为低密度聚乙烯（LDPE）。对零件结构进行了工艺分析。确定了分型面、浇注系统等，选择了注射机，计算了成型零部件的尺寸，并对注射模结构形状进行了设计。采用侧浇口，利用直导柱导向，推杆顶料，脱模板完成脱模。如此设计出的结构可确保模具工作运用可靠。最后分析了模具的工作过程，对模具结构与注射机的匹配进行了校核,编制了主要成型零件的工艺规程。并用AutoCAD和PRO/E绘制了一套模具装配图和零件图。 关键词：小油壶盖；注射模；螺纹；模具设计；LDPE Abstract The design is based on the basic principles of plastic molding, in particularly, it adopts a single surface of the working principle of injection molding, It uses the CAD and CAM for the lid of a small oiler injection molding, It analysis the parts in detail. And choose the LDPE as the materials. Then analysis the structure of the parts, confirms the parting surface, Gating system, and at the same time selects the injection machine, calculates the size of the molding parts and also designs the structure of it. In order to ensure the normal work of the mold we uses the side gate, Uses the straight guide pillar guidance, putting the top material, the template completes the drawing of patterns. Finally, we check the structure of the mold injection machine, and the working process and we also use AutoCAD and PRO/E to draw the mold assemble and the parts drawings. Keyword: The lid of a small oiler; Injection mold; Screw thread; Mold design; LDPE 目 录 TOC \o 1-2 \h \z \u HYPERLINK \l _Toc231199617 摘 要 PAGEREF _Toc231199617 \h I HYPERLINK \l _Toc231199618 Abstract PAGEREF _Toc231199618 \h II HYPERLINK \l _Toc231199619 1 绪 论 PAGEREF _Toc231199619 \h 1 HYPERLINK \l _Toc231199620 1.1 塑料成型模具在加工工业中的地位 PAGEREF _Toc231199620 \h 1 HYPERLINK \l _Toc231199621 1.2 中国塑料模具工业发展现状 PAGEREF _Toc231199621 \h 1 HYPERLINK \l _Toc231199622 1.3 塑料成型模具发展趋势 PAGEREF _Toc231199622 \h 2 HYPERLINK \l _Toc231199623 2 塑件工艺性分析 PAGEREF _Toc231199623 \h 4 HYPERLINK \l _Toc231199624 2.1 塑件工艺性分析 PAGEREF _Toc231199624 \h 4 HYPERLINK \l _Toc231199625 2.2 初步拟定总体设计方案 PAGEREF _Toc231199625 \h 6 HYPERLINK \l _Toc231199626 3