全双工无线通信系统的自干扰消除技术研究通信与信息系统专业论文.docxVIP

摘要在非线性自干扰消除方面，本文分别对全双工系统收发链路中存在的非线性 摘要 在非线性自干扰消除方面，本文分别对全双工系统收发链路中存在的非线性 进行建模，并提出了两种非线性白干扰消除算法。仿真结果表明，发射功率接近 7dBm时，发射链路非线性自干扰消除算法的抑制能力将超过线性白干扰消除的 抑制能力；而随着发射功率的不断增大，接收链路非线性自干扰消除算法可以显 著提升SINR水平，即使对于完全线性的接收链路，也优于单纯使用线性算法的 性能。 未来将进一步对全双工多入多出系统的自干扰消除算法进行改进和优化。 关键词：全双工；自干扰消除；多入多出；极化信息处理；非线性 万方数据 AbstractAbstract Abstract Abstract With the fourth generation mobile communication(4G)entering into large-scale commercial stage，the fifth generation mobile communication(5G)for 2020 and beyond has become a hot global research．As the two main driving force of future mobile communication development，Mobile Intemet and Intemet of things provide a broad application prospects for 5G．Facing thousand fold increase of data traffic in the future，and hundreds billion devices connected and diverse business needs，5G system not only needs to meet a more flexible network deployment and more efficient operation and maintenance，but also needs a substantial increase in spectral efficiency, energy efficiency and cost effectiveness．As one of the key potential 5G technology, Co．．time Co．．frequency Full．-duplex technology in recent years has been widespread concemed．Co．time Co．frequency Full-duplex means that wireless nodes Can receive and transmit signals using the same frequency at the same time．Compared with the conventional Frequency Division Duplex or Time Division Duplex，Co-time Co．．frequency Full．-duplex has more efficient spectrum utilization and resource utilization，and Can enhance network and device transceiver design freedom to the greatest limitation to enhance network and device transceiver design freedom。In addition，Co．time Co-frequency Full-duplex technology has a higher performance advantage in reducing congestion，lower-end transmission delay,wireless access collision avoidance and mitigation hidden terminal problem． Since a Co．．time Co．．frequency Full··duplex transceiver system uses the same time and frequency resources，the interference signal power from the proximal end caused by t