第28 卷第2 期 高 校 化 学 工 程 学 报 No.2 Vol.28
2014 年 4 月 Journal of Chemical Engineering of Chinese Universities Apr . 2014
文章编号:1003-9015(2014)02-0438-05
吸收液对电化学氧化吸收甲苯废气的影响
许青枝, 黄立维, 蒋廉颖
(浙江工业大学 生物与环境工程学院,浙江 杭州 310014)
摘 要:对采用溶液吸收结合电化学氧化联合处理甲苯废气进行了实验研究。电化学反应器尺寸为 110 mm×110
mm×500 mm ,反应器内采用5 对网状电极叠加分布,阳极材料为网状钌钛电极,共5 块,阴极材料为网状不锈钢电极,
共5 块,两相邻极板间距为45 mm 。甲苯模拟废气由化学反应器底部通过气体分布器进入反应器。实验发现吸收液为
NaCl 时甲苯的去除效果要好于吸收液为Na SO 的效果。在气体流量为1500 mLmin1,吸收液为1%NaCl 溶液,甲苯
2 4
废气浓度约为2000 mgm3 ,电流密度0.08 Acm2 时,甲苯的去除率可以达到80.1% 。实验还发现pH 值降低有利于提
高甲苯的去除率,表明在酸性溶液中更有利于甲苯的氧化反应。通过对反应后吸收液的分析,发现甲苯吸收反应后的
产物主要为苯甲酸。
关键词:甲苯;电化学反应器;去除率;氧化
中图分类号:TQ028.14 ;TQ035 文献标识码:A DOI :10.3969/j.issn.1003-9015.2014.02.040
Effect of Absorbent on the Removal of Toluene by Absorption Combined with
Electrochemical Oxidation
XU Qing–zhi, HUANG Li-wei, JIANG Lian-ying
(College of Biological and Environmental Engineering, Zhejiang University of Technology,
Hangzhou 310014, China)
Abstract: Toluene-containing exhaust gas was treated by aqueous solution absorption combined
electrochemical oxidation. The dimension of the electrochemical reactor is 110 mm×110 mm×500 mm and in
the reactor it has 5 pairs of stacked mesh electrodes. The material of anode is Ti coated with RuO2 on the surface,
and the material of cathode is stainless steel. The distance between neighboring anode and cathode is 45 mm.
The simulated gas was introduced into the reactor from the bottom of the reactor by a gas distributo
原创力文档

文档评论(0)