变电站自动化系统及其通信体系的农业电气化与自动化专业论文.docxVIP

中国农业大学博士学臣论文IllIll 中国农业大学博士学臣论文 IllIll Abstract Today the inevitable developing trend of substation automation system，which is the core of electric power system，prefers the networking and integration technology．However,as the communication in the substation automation system whatever by serial interface or field bus has various and disunified types and protocols，the automation devices ofthe substation call not perform the interoperability，which brings not only tremendous difficulties and frustrations on the design，integration，maintenance and upgrade ofthe system but also the increasing system life cycle cost．From the system reliability point of view，since its implication of the index is ambiguous，the correct comparison and evaluation on the reliability among the different system Call not be made by the customers．In addition，under the fault condition in the substation，the data avalanche processing ability of the system Can not be testified，SO that the endurance capability as well as the data process capabilityof the system can not be weighed after the system is put into real operation，therefore，the reliability and expandability ofthe system Can not be comprehensively validated． In order to change the complicated and unreaSonable situation of the current substation automation system，realize the interoperability among the automation devices，and reduce the system life cycle cost, the approach of solving above mentioned problems is deeply researched．The Process Network Architecture(PNA)baSed on the seamless communication concept fur substation is set up，which neglect all kinds ofthe protocol conversion，SO as to increase the efficiency ofthe data transmission as well as realize the interoperability．The improvement method of Etheroet medium access control protocol is put forward．The current and future configuration model of PNA is described，based on which the NTP syncronization as well as SNMP function are realized． The functional logic design method for realizing the inte